My 87 20v Mk2 project

[cdiddydo]

so been doing a bit more work recently! :thumbup::thumbup::thumbup:

been acquiring more parts to keep progressing on the build, those parts are!

-walbaro inline fuel pump
-new clutch master cylinder
-some girling 54's to run while i save some more dough for the wilwood stuff i want
-vr6 power steering pump with 1.8t pulley

i also recently got the rest of the car undercoated. fuel tank is out getting all new clamps for the hose and cleaned off 26 years of junk that had built up.

[cdiddydo]

thinking red might be the best option!

[cdiddydo]

so i am thinking that while i have access to the valve cover and the intake, that i should paint it a different color to help break up all the black,

open to suggestions

leaning towards red or golf

[cdiddydo]

been doing more work lately,

got my drive by wire gas pedal welded up,
pedal cluster is in. i did however find out i need a new clutch master, another 100$:banghead:
i also got the starter temporarily installed until i get the correct bolts,
and i also began to get a rough idea of my charge piping and intake, still waiting on my intercooler
to get welded up before i can get all that in. also picked up a used intank pump.

anyways pictures of the progress:thumbup:

[cdiddydo]

Got some more work done yesterday,

Heater box is up and in, minus side plumbing.

A pillars are in, and passenger side door cards, and rear speaker trays are in

Anyone have a good tip for the rear card, can't seem to get the card under the clips on the window, which means in sticks out on the top.

Anyways here are some terrible pictures

URL=http://s1160.photobucket.com/user/sjbitcwjh/media/C6F304E8-C2BD-43B4-BE82-DE2EE7231931-423-000000C31AD4656A_zps72e3e179.jpg.html][/URL]

[cdiddydo]

So update time once again,

got to work installing the sound deadening on the firewall, i had removed the stock stuff on a whim, so i figured i better do something. I used b-quiet standard sound deadening mat. It was actually a lot more work then i anticipated lots of cutting and heating etc......


i also installed a heat shield for the turbo but forgot to snap a picture.

today i am hoping to starting piecing the interior back together all the side pillars etc, i can't seem to remember how the rear door cards go back in, they have this wierd stacked plastic clip with screw with cap i can't seem to get back together.

anyways, PROGRESS

[cdiddydo]

I dont normally like mk2's but this...









subbed.

they grow on you.....pretty easily too

[Miles.]

I dont normally like mk2's but this...









subbed.

[cdiddydo]

so motor is all in now, in the past few weeks this has happened

-new oil pan adapter for turbo oil return
-mounted the coil
-mocked in the rad support
-mocked in the intercooler
-got an idea of the piping

now i am just waiting on some turbo related bits like some random weird couplers etc, also need to get my intercooler modified to fit out of sight behind the grille
which on a small bumper mk2 is tough anyways progress is progress

[cdiddydo]

alrighty! time for a pretty big update!

since my last update i have done quite a bit of important stuff. I mounted the clutch master and the brake booster etc......got the master cleaned up and put in. got the brake lines back in., cleaned up a front crossmember and put that in aswell.........also pulled the 02m clutch, mk4 a/c compressor and mk4 powersteering pump/............

so i could finally put the motor in! anyways let the pictures do the talking

[cdiddydo]

got the bay all sprayed, did a semi gloss black, figured black is a good choice since i will bang shit up putting the motor in etc, then once the whole car gets resprayed i am going to redo the bay, more shaving etc.

also got some other bits painted

[cdiddydo]

here is a bit of an update, finally got to work on the bay, just trying to get it back to a point where i could spray it t-red again. not looking for show car like looks here, just plain simple tidied up etc...not all smooth and perfect.

so i filled a few spots

then i hit it with some etching primer

and then 3 coats of filler primer, which i will give a quick 400 grit sand before i hit it with some color,

[JoeMallett]

Looking forward to this, sub'd.

[cdiddydo]

time for another small update,

i picked up my motor that had been sitting in the shop for a while,

i will post details if you want.

i somehow broke the oil return line fitting, but other then that seems good.
going to delete the a/c and power steering aswell eventually.

and here it is!

[cdiddydo]

managed to get the old exhaust off the other day, going hook the rear beam back up, today and wash the car, its so gross hasn't been washed in years. then maybe find some stuff to piss around with, waiting for some cashola, then the bay is getting painted