just another static truck in the making

[Belvader]

well I was looking through Milano_red's build thread today and I started to miss my old sterio setup in my truck looking at the amazing job he did on his so I went down to lowes and picked up $30 worth of wood and turned this

into this


and here's just an inside shot of the supports and crap

while I was doing that this came in the mail

I tried hugging the ups man but he backed up really fast and explained that he had a wife...

in this pic it's not mounted just wedged up in there

[Belvader]

ya I feel you, I got an idea now of my plan which is just simply getting lows first to fit my current wheels then new wheels... then more lows to fit the new wheels

[notsolow]

Well jeff zac is low but unless you have coilovers or bags you will never be able to ho that low with a truckperiod. What u should try for is closing your wheel gap. That will keep your truck looking low while giving it an aggressive stance and also being able to daily drive your truck.

[Belvader]

I decided to take out the console and go back in with the mini console


and I know it looks like shit but I did my first tint job, I only got the front strip done yesterday i'm going to finish it up today, hopefully


that's all folks!

[Belvader]

What about 17s why do u only want 15s or 16s? 17in Rota p45 wheels would look pretty Damn cool if u ask me. What is you bolt spacing?

It's 5x114.3, and I'm just not sure if I can get as low as I want with 17's , don't get me wrong some rota p45's in a 17" wheel would look damn good but I would have to tuck wheel to get how low I want.... Or at least I think so. Austin I'm trying to get as low as Zac burch if that gives u an idea of what I'm looking for

[Belvader]

300 zx wheels are fugly IMO.. If you get them measure the center hub hole to make sure they fit onto your current front hubs.. If they don't then non-hubcentric spacer should do the job.. They look like +30-40 offset so even with 2'' spacers forget about a flush fitment..

If you're going x10 wheels I'd recommend 8.5-9 inch max in front, or it will need great fender work and still will rob if you are rly low.

Aight thanks dude, and I got back up with the guy who had those wheels after I saved up and he sold them anyway. But thanks again about the wheel sizing

[notsolow]

What about 17s why do u only want 15s or 16s? 17in Rota p45 wheels would look pretty Damn cool if u ask me. What is you bolt spacing?

[beluga420]

300 zx wheels are fugly IMO.. If you get them measure the center hub hole to make sure they fit onto your current front hubs.. If they don't then non-hubcentric spacer should do the job.. They look like +30-40 offset so even with 2'' spacers forget about a flush fitment..

If you're going x10 wheels I'd recommend 8.5-9 inch max in front, or it will need great fender work and still will rob if you are rly low.

[Belvader]

haven't had much progress, more lows are on the way now for the c10 (the blue mopar is my friend Gregg)
so in the mean time I had a cruise night

the cops didn't take it lightly though when I launched on to the boulevard leaving the cruise in. but in a world which contains good news I have found a cam that im going to be getting pretty soon, I can't remember right now what it's called but back when it was owned by cam dynamics it was called the enforcer and I'm doing a 500 lift with it, but I wont be getting a stall convertor as soon as I get it just because it's not necessary

[Belvader]

Thanks man, it's getting there

[Belvader]

Its worth a shot. Hell I would buy them if I was closer

Do it, those wheels will be dope!

Aight then I'll get them as long as the dude still has them I gotta wait till I get paid though so it'll be a little bit before I get them

[Belvader]

Hey you're only like an hour from me! lol

Just noticed that... I almost bought a long bed c10 but some other stuff went down...

Lol that's cool man, I might have seen u around because I head down towards Raleigh a lot now for meets and such

[metalmonkey47]

Interesting build. Keep it up

[rice4life]

Do it, those wheels will be dope!

[milano_red]

http://raleigh.craigslist.org/pts/3830655686.html
maybe.... they would look cool painted white and they would be sure as hell be cheaper than any new wheels just thought I would throw these out there, because for $100 I could clean them up and use them as a plate for all I care lol

Its worth a shot. Hell I would buy them if I was closer