just another static truck in the making

[Belvader]

I don't know if the spacers are worth it. To me, if you're going to rock 15s on a mini truck they have to be stupid deep dish with stretched meaty tires (kinda like mine). I would just buy some jegs or summit steelies in 16x8 or 16x10 for this truck, kinda like beluga's setup. That or stay on craigslist, rednecks are always selling mud rims. As for the thread, I know what it's like being young and building a truck on a budget. The small shit you do, you tell your homies. The bigger updates are for forums. Build your truck the way you want, but remember as soon as it hits the internet you gotta accept criticism. $.02

you got a good point, because i was thinking i would run the mesh wheel in the summer but some wide ass steelies would make an awesome winter wheel. and the wheels are a lil small but they will work out once i lower it more

[Belvader]

Body drop body drop body drop



Should I keep chanting

Say Whaaaaaaaaaaaaaa

nah, i just got done looking into body drops and my friend who does body drops said that he could do it for me $400 an inch when your average shop would charge around $1000 an inch.... sssoooo that isn't gonna happen

[Randomofodication]

nah, i just got done looking into body drops and my friend who does body drops said that he could do it for me $400 an inch when your average shop would charge around $1000 an inch.... sssoooo that isn't gonna happen

But essentially the truck looks an inch lower without
Losing any clearance. 400 bucks for him to do it doesn't seem to to bad providing he does quality work. Better spent on that then lowering it on springs and losing more
Clearance.

[07NJx355]

crazy amount of work for a bodydrop. I wouldn't even look into it unless i was building a show truck on air.

[Belvader]

Ya, I understand the amount of work that goes into a body drop I just know that my under carriage is already about to bottom out and I have to bring my truck down a lot to rid of my wheel gap and a body drop would be the perfect solution but at even $400 an inch I'd have to sell the whole truck just be able to afford it

[Isuzupickup]

Bigger wheel/tire diameters are going to get rid of the wheel gap man. And I would definitely bag before body drop.

[beluga420]

crazy amount of work for a bodydrop. I wouldn't even look into it unless i was building a show truck on air.

x2.

[Belvader]

Bigger wheel/tire diameters are going to get rid of the wheel gap man. And I would definitely bag before body drop.

ya i just **** to go out and get new wheels right after i got these wheels because unlike wheels i have gotten in the past i seriously like these wheels but i'll work it out one way or the other

[Belvader]

x2.

ya but i'll get it work out one way or the other, it just might take a little bit longer than expected

[Rocknthehawk]

$400/inch doesn't even make sense. You're cutting the entire floor out and relocating things anyway. one inch or four inches shouldn't matter.

that said, I'd bag it before any sort of bodydrop. or just get bigger rims.

[Randomofodication]

$400/inch doesn't even make sense. You're cutting the entire floor out and relocating things anyway. one inch or four inches shouldn't matter.

that said, I'd bag it before any sort of bodydrop. or just get bigger rims.

Thought the same thing about $/per inch. Bags would be saweet

[Belvader]

$400/inch doesn't even make sense. You're cutting the entire floor out and relocating things anyway. one inch or four inches shouldn't matter.

that said, I'd bag it before any sort of bodydrop. or just get bigger rims.

i see what your saying, personally i don't understand it either but that's how they charge for it and it's just a way for them to get more $

[Belvader]

Thought the same thing about $/per inch. Bags would be saweet

bags are for pussies, sorry dude but if you can park it that low drive off from a dead start that low. just my $0.02 on bags. and i'm in a club of all bagged trucks so i don't discriminate against those guys cause their like family, it's just that bags aren't for me

[Belvader]

Legit update!
I thought the truck was looking fucking stupid with the mesh wheels at the hight it was at so I threw the stockies back on for now. And I am hopefully putting the fuel cell in tomoro I have my friend who bags and bodies shit coming over to help put in because I've never done this before, so after that I gotta get my raised x member, and the notch then the bitch is going down

[Dirt Nasty]

bags are for pussies

bags are for people who like bags.