aveo build

[hondarida5]

Looks good

[Randomofodication]

Are you planning on getting the wheels to fit just with a stretch? Like no camber at all? Looks cool so far, in to see more! Definitely a fun little car to play with

[tunnelvision]

they dont make camber kits for my car so ill have to fab some up this winter.

[244Brick]

I would compress the suspension to see where the wheels naturally camber in to. Then, if its manageable go and get the fenders rolled and pulled

[tunnelvision]

since the rear is pretty much solid axle the coils just go straight down. The best i found was camber shims but it would be 1 maybe 2 degrees. I rolled the fenders but im not confident enough to pull them nor do i have an actual roller i used a body hammer

[244Brick]

My kia has the same torion rear, just stack your shims :thumpsup!!

[tunnelvision]

i like your style

[244Brick]

+1 Yeah man, this is my buddy's forte with stacked shims to make it -5/6


sorry for posting someone's car in your thread

[mule.]

diggin the wheels, whats the offset?

[tunnelvision]

-12 offset on the wheels. i like that kia how many shims per side do you think?

[244Brick]

it really depends on how much is needed. Our SPC shims is about -1.5 each

[tunnelvision]

So i found so shims that should work my rear axle and hubs are veary similar to an mk2golf setup. since im aready using the coilovers from that system i should be able to use them they are offered in .5 and 1.0 negative camber. I will order these after a little more looking.

[xBDIRTY]

Interesting build! Definitely in for more as you go along. Props for being different but not ridiculous

[tunnelvision]

I got my cteetah tank in today hopefully muy next post will be pics of a done car

[tunnelvision]

I cant get the tires to stretch. Even with the tank they wont budge I tried with an innertube on the back side and with out still nothing. What am i not doing correctly? Ive seen my tire get stretched to a 9 in rim with no issue mine is an 8 it should work. Any help would be awswome.