Project MK4 GTI

[HPG-Matt]

Ok so this is one of our ongoing projects we work on in between customers cars. Its been somewhat slow going but we should have it completed here hopefully before the end of the year.

Car is a 00 Flash Red GTI 12v VR6

here is the current mod list

motor-
m20 custom one off short runner polished intake manifold
custom 3" cold air intake w/ aem dri flow 3" filter and 3" billet 034 maf housing
8mm kingsborne spark plug wires
mk3 12v vr6 polished valve cover
mk3 12v vr6 fuel injectors
samco coolant hose kit
034 silicone hose for heater core
mishimoto aluminum radiator
giac chip
ecs pullies
jegs billet polished aluminum radiator filler neck and cap
gruven parts billet crack pipe
deleted coolant over flow tank
deleted windshield washer tank
deleted sai system
complete wire tuck
deleted secondary radiator fan
custom braided stainless steel ac line
polished oem ac lines
polished serpentine belt tensioner
polished alternator
polished diesel geek sigma 5 short shifter
polished vf engineering motor and trans mounts
polished 1" custom motor spacers
034 density line dog bone mount
obx polished stainless steel headers
j caps polished oil cap
j caps polished strut tower caps
polished power steering tank cap
power steering tank relocated to secondary radiator mount
braided stainless steel fuel lines
shaved and smoothed engine bay
optima yellow top relocated to spare tire well
block and transmission painted gloss black
eurospec stage 2 clutch w/ 11 lb flywheel
magnaflow exhaust w/ turn down tip

exterior-
jetta front end conversion
jetta votex front bumper w/ shaved blinkers
oem r32 side skirts
oem euro r32 rear bumper with shaved vents and exhaust openings
shaved rub strips
shaved door cups
driver side door lock delete
shaved side markers
sprinter vent molded into driver side fender
shaved hatch
shaved hood notch
4 bar badgeless grill
shaved antenna
oem stubby mirriors
full respray in flash red with uni black roof, mirrors and middle insert of front bumper
oem audi tt polished gas door kit

brakes/ suspension-
stoptech 13.1" 4 piston front bbk
eurospec 11.3" rear bbk
stoptech posi quiet front and rear pads
fk front coil over struts
custom cnc machined bag brackets
universal air custom double billow sleeve over bags
034 density line audi 90 strut bushings
custom half height strut tower caps
r32 front control arm bushings
notched passenger side frame rail
trimmed sub frame for control arm clearance
front sway bar deleted
slam specialties ss5 rear bags
custom rear bag brackets
polished 3 gallon aluminum tank
dual viair 380's
parker water trap
accuair vu4 manifold
accuair switch speed controller
dakota digital odyssey gauge with 150 psi sending units
copper hard lines
rear fk shocks
neuspeed front strut tower bar
yarrowsport rear strut tower bar
bfi c pillar bar

wheels-
tracer tech 1's
18x8.5" front with 215/35/18 tires
18x11" rear with 225/40/18 tires
full polished faces
gold spike bolts

interior-
oem brushed aluminum dash trim and door handles
oem 20th anniversary door lock pins
oem 20th anniversary pedals and dead pedal
oem euro vw motorsport steering wheel
oem euro 25th anniversary gauge cluster
oem r32 door cards
oem 337 shift boot and e brake boot
oem 337 shift knob
mhw audi tt shifter surround
custom red suede headliner
recaro topline front seats in black leather w/ alcantara centers
oem high bolster black leather bench w/ alcantara centers
weichers roll bar

stereo-

avic f900bt double din nav/dvd head unit w/ ipod hook up
jl 5x100 amp
jl 12" w6
stinger digital cap
stinger distribution block
stinger platinum digital positive battery clamp
stinger platinum negative battery clamp

pics

when I first started




and the work

































started to put her back together










got to this point and decided I wasnt happy so had to make some changes









and how she sits right now

[Euroa4]

lookes great

[Forty-six and 2]

I really like the work done in the bay. Where did you run the wires? The sprinter's vent looks randomly placed. I think you may have grabbed the wrong side's vent...

[HPG-Matt]

I really like the work done in the bay. Where did you run the wires? The sprinter's vent looks randomly placed. I think you may have grabbed the wrong side's vent...

The largest portion of the harness was routed down from the rain tray and into the lower frame rail and it comes out right near the transmission, some of the rest of the harness was routed along the upper frame rails

[vgrntbeauxner]

for the love of kittens, make better pictures. and dont use that horrendous fuel door. or that fender.

[HPG-Matt]

for the love of kittens, make better pictures. and dont use that horrendous fuel door. or that fender.

good thing its not your car cause the tt fuel door and the fender are staying

[Staticeuro12]

Hey man question on how you did the delete for the coolant bubble and lines

[Kindom888]

HI guys - thanks very much for posting this info.