350z rear widebody build

[Arteeste]

That new paint is perfection !

[benz88]

Looks alright. Not really feeling the fenders. Especially the blatant mismatch between the fronts and rears. Work looks solid though

This. Sadly its the same way i feel about Topaz's e46 also.

[MommysLittleMonster]

Looks alright. Not really feeling the fenders. Especially the blatant mismatch between the fronts and rears. Work looks solid though

Pretty much what I was thinking too. :/ Just doesn't look organic with the rest of the car.

Whoever did the work did a great job, I'll give them that.

[Justin821]

Looks good, more poke in rear would set it off.

[potato]

space the rear wheels out... or get some wider

nex time i need tires ill probably run a 285 instead and im working on getting a 5mm spacer for the rear.

[projektzwo]

space the rear wheels out... or get some wider

[potato]

this was the best thing to do to flow with the stretched bumper

[KarlSpackler]

Looks alright. Not really feeling the fenders. Especially the blatant mismatch between the fronts and rears. Work looks solid though

My exact thoughts. The fronts have a small angle down and that turns to a flat spot for about 1" at the tire.... Rears don't .....

[potato]

I'm pretty sure I've seen this thing around Houston a couple times. I was actually at that JDM show in the pics if that was in Houston. I was in the Joe Z Performance IS-F.

Car is looking great.

I'm trying to get back in town this Sunday for wekfest so maybe I'll see you out there.

Keep up the good work.

All those pics are at wekfest in Austin this past weekend.

[Ollie]

Looks alright. Not really feeling the fenders. Especially the blatant mismatch between the fronts and rears. Work looks solid though

[brownishwater]

I'm pretty sure I've seen this thing around Houston a couple times. I was actually at that JDM show in the pics if that was in Houston. I was in the Joe Z Performance IS-F.

Car is looking great.

I'm trying to get back in town this Sunday for wekfest so maybe I'll see you out there.

Keep up the good work.

[potato]

Looks good. My only criticism would have been that since you were repeating the entire car, you should have filled in the front bumper emblem divot. Secondly, why didn't you have them clear bra the front... would have been better than that tale. Was it because the paint was so fresh?

i was rushing to have everything done before wekfest and the emblem didnt even occur to me. i tried sticking the stock one on and it doesnt fit so im going to have to make some modifications to it so it will fit right. as far as the clear bra, i didnt want to have one put on, then the bumper flex and stretch it out. since its polyurethane its going to be moving alot when it catches on things and i figured a clear bra would get ugly soon after

[244Brick]

Wow, good stuff! i'm with the 5mm in the rear... needs a lil more poke

[tristinGrind]

Looks good. My only criticism would have been that since you were repeating the entire car, you should have filled in the front bumper emblem divot. Secondly, why didn't you have them clear bra the front... would have been better than that tale. Was it because the paint was so fresh?

[forloveandglory]

"I like big butts and I cannot lie …"
Looks spot on.