Bagged Honda Fit

[Chris05ppwz]

This is awesome, nicely done!

[mike410]

So I ordered wheels at the end of July. I got them the end of last week.









15x8.5 +27 SL disk, SBC finish






So I ordered them knowing they might not clear the front brakes. Nothing a small spacer couldn't fix, just had to wait till I got them to figure out what size spacer I needed. Turns out 2.5mm is what I need so I ordered a 3mm spacer.












Fitment was spot on. Glad that I can still do math


Just needed some tires, 165/55r15 Achilles is what I ended up with.





Spacer for the front hadn't arrived yet so just put the rears on for the time being.







ASS ASS ASS ASS ASS



Threw my temporary spacers on this morning (washers lol, just to get the wheels on and in the driveway for pics)




















Couldn't be happier with how it turned out. Just need to figure out my driving height and get an alignment and its ready for some long needed mileage.

[FunfGang]

OP doesn't suck, so no they aren't reps.

Hahahaha I found this hilarious


Looks great.

[Z33_Taxi]

looks great

[hinrichs]

good progress so far, id go with the ssr mesh personally, gives it a unique look.

[mike410]

Ten months since my last post, probably because nothing changed.

Well, some small things have changed.


New version Accuair sensors installed, way better than the older version (just less prone to breaking the arm)






Bought a wheel to test fit, 15x9 +36




Got a t1r in 195/45r15 to stretch on it




Bam, awesome fender on lip fitment






There was a problem though. The tire is hitting the bumper and I have shaved the bumper as much as I could. I wouldn't care as I don't drive it at that height but it makes the corner stick out and look ugly like so




It is also crazy close to my shock, but since its a twist beam I think it would be fine




The front fitment was better as the front loses track width due to suspension geometry when airing out. I just wish it would get that little bit lower to sit the fender on the lip. Subframe is on the ground so I don't think that going to happen anytime soon.











Made a cover to go over the tank that I still haven't carpeted






So I'm just trying to figure out what wheels to get.

Either going to get a 15" wheel less aggressive than the 15x9 I have. Would most likely be Work Meister S1





OR

Get 16s in specs that I can tuck like this (15x7 +26 pictured)



Options are

SSR SP3R



SSR Reverse Mesh




or Work Meister S1R/SSR SP1R. Also open to any suggestions as I don't really love any of the wheels above. Probably just need to buy a set and grow to love them.

[244Brick]

yea this is sweet! IDK what wheels either AMEs?

[mike410]

So finally some progress. e-Level sensors in and everything works. I can't believe I waited this long to get this done.

Currently rocking the stock wheels



and my calibration vid

http://www.youtube.com/watch?v=Ws4RacuyKL8&feature=youtu.be

No idea what wheels to get, hard to fit anything aggressive under the fenders.

[mike410]

Gayeeeeeeeeeeeeee.

<3

Awesome! Do you have any updated pictures with the new wheels?

Looks great man, Glad you made the rear lower,

Hopefully the new wheels will 'fit' well ...

I had to.

Refinished the wheels



Fitted





I'm not liking how they look. They needed a 10mm spacer in the front to clear the brakes. 195/50s are just too meaty of a tire. Pretty much decided on going to 16x8s just not sure what wheel.

This is gonna be even slower of a build now as it no longer is my daily. I have a first gen Insight for that

[JonnyBoi]

Looks great man, Glad you made the rear lower,

Hopefully the new wheels will 'fit' well ...

I had to.

[gbaby2089]

Gayeeeeeeeeeeeeee.

[244Brick]

Yes please!

[Alex@BagRiders]

Awesome! Do you have any updated pictures with the new wheels?

[rsingh3g]

This is a fit I'd drive

[eddiegratis]

this is sweet!