Team Chihuahua's MX5 MKII Mini Project

[dav3design]

Thanks fella The lad who owns it seems really happy anyways

Make the car look a million times better!

LOL I meant "they make the car look a millions times better"


AHAHA

[Kruizer]

Wait till its running the RX8 engine and gearbox

[Kruizer]

The overfenders look dope! Make the car look a million times better!

Thanks fella The lad who owns it seems really happy anyways

[dav3design]

The overfenders look dope! Make the car look a million times better!

[Kruizer]

this miata is badass. all the custom work is awesome.

Cheers fella, didn't take too long either

[ryanjblajda]

this miata is badass. all the custom work is awesome.

[Kruizer]

All this, just in between? Stunning!

Thanks I just spent an hour here and there in the evenings tipping away, think the whole lot only took about 46hrs which is still alot, could have done it quicker but like I said, was just tipping away so as not to get bored... Once painted it'll be off to the fabricators for new engine and gearbox mounts for the 231bhp RX8 engine and box

[forloveandglory]

All this, just in between? Stunning!

[Kruizer]

Used some acid primer to cover up any bare metal that was cut for the over fenders



This is like a bloody jigsaw with all the bits LoL



For the most part I'm done now with the car, back bumper is primed, corner pieces from the spoiler are primed up, over fenders have been refitted to make sure they look right. So she is sitting pretty waiting to go to the panel beater tonight. The car will get a full shot of debeers 2pac primer and then block it all down before paint...





I'll have my garage back and be able to give it a good clean now, happy days Next up, the new project before the RX8 comes back...

[Kruizer]

Put a few hours into the spoiler and bonnet so here ya go, spoiler not finished completely but almost there :









Repaired all the rough spots on the rear bumper last night and primed them up, also primed the front splitter :



She is all happy again, big smiles



Got a dacant set of honda alloys bud to hold her off the ground while I start into the refurb of the Dori's :



Decided to clean up the lines on the overfenders and fill in the gaps, threw a bit of primer on just to make sure they look right :




Wet sanded the bonnet and gave it a shot of primer also :

[Kruizer]

Chopped the bonnet, got the vents bonded and pop riveted on... Its ground down now and ready for filler / fibreglass :






Chopped up the RX8 spoiler and now have it flush with the lines of the car :






Pulled the car out to have a quick look at the overall presence :



RX8 spoiler is now a three piece jobbie and has been fibreglassed back together, will be reinforced from underneath and finished off by the weekend.

[Kruizer]

So the passenger real wheel was way off, soon figured out why :


Right :



Very Wrong :



So all set up correctly decided to get a few quick pics in the sun as the clearance issues were not sorted, bumpers trimmed, splah guards removed and chassis rail modified to suit...




So the rear looked a bit naked, had an RX8 spoiler left over from my own car so I will be cutting it up to reshape and fit to the MX5, hopefully works out according to plan





Got onto Brian for another bonnet skin, should look well with the standard hump in the middle once finished :



Will more than likely loose the frame underneath...


More cutting to do but you get the idea...

[Kruizer]

Had a couple of hours to kill so got to fitting the arches :

[Kruizer]

props for the work you puttin in this

u gonna keep it white?

Hey fella, ya the car is staying white however it will be swapping over to Toyota 040 Super White

Cleaned up the front panel to see how good the paint was under the grit :


So while I was waiting on tires I decided to piss about with the centres :







Even Romeo had an auld gander :


So a quick text to Kieran and it was decided to expand the build a little :




Some MK1 arches that will need to be modified to fit properly :



And out with the grinder to give another 3" of clearance :

[P78]

props for the work you puttin in this

u gonna keep it white?