my first 240sx, keeping it clean

[rsingh3g]

don't even get me started haha i wasn't even sure if i wanted to trade with the kid, and we were all hanging out at a friends shop and i left with someone to run to napa or whatever and i came back and he was almost done swapping them.. i didn't know what to say and i didn't stand up for myself. whatever though, i used to love battles when i was 15/16 first reading through nico and zilvia seeing them everywhere. they need to be cleaned up and i need my spacers up front, plus if i had 2 battles in 18's for out back with some more lows it'd look pretty nice

I would've beat some kid up
I think if you did the staggered look like that in the rear it would look great

[PJ Prendergast]

I love it, but really wish you would get some RPF1's again

don't even get me started haha i wasn't even sure if i wanted to trade with the kid, and we were all hanging out at a friends shop and i left with someone to run to napa or whatever and i came back and he was almost done swapping them.. i didn't know what to say and i didn't stand up for myself. whatever though, i used to love battles when i was 15/16 first reading through nico and zilvia seeing them everywhere. they need to be cleaned up and i need my spacers up front, plus if i had 2 battles in 18's for out back with some more lows it'd look pretty nice

[rsingh3g]

I love it, but really wish you would get some RPF1's again

[PJ Prendergast]

That thing is dope man, glad to see you're tracking that thing too! Sucks about the fitment issues with the VR4, but whatevs, it's still a clean, badass twin turbo sports car, like you said.

Oh and I probably haven't seen a set of those RH C5's on a car in like 6-8 years haha thank you for the throwback. Please put them on, at least for a day or two haha

i really wanted to relip them to like 18x10 and run them out back with my battles up front but idk what aftermarket lips would fit them, plus i need an affordable solution haha once i get my spacers back from my friend i'd like to run them up front with some cool sort of 18's out back. right now i'm so focused on drifting haha i'm so broke but all i want to do is spend money on spares and paying entrance fees for events :p limerock should be really sweet though, the course looks like so much fun to drive! over my winter break i plan on pulling off the fenders/front bumper and properly tucking the wires as well as finally installing my skid plate, then i'll slam the bitch all the way down haha

[Lt. Dangle]

That thing is dope man, glad to see you're tracking that thing too! Sucks about the fitment issues with the VR4, but whatevs, it's still a clean, badass twin turbo sports car, like you said.

Oh and I probably haven't seen a set of those RH C5's on a car in like 6-8 years haha thank you for the throwback. Please put them on, at least for a day or two haha

[PJ Prendergast]

threw my 16's on because they were the only good tires i had to pass inspection haha


Untitled by P.J. Prendergast, on Flickr

and i've gotten a ton of drifting done since i last posted on here. my first 2 events i drove were rainy, so here's some better pics of the most recent one this past weekend


DSC_0005 by P.J. Prendergast, on Flickr


DSC_0006 by P.J. Prendergast, on Flickr


DSC_0009 by P.J. Prendergast, on Flickr


DSC_0017 by P.J. Prendergast, on Flickr

my dad got a few really sick shots of one of stancework's own too


DSC_0035 by P.J. Prendergast, on Flickr


DSC_0036 by P.J. Prendergast, on Flickr


DSC_0040 by P.J. Prendergast, on Flickr

and i scored this really nice OMP seat for $150 from a friend at the event. fits my ass perfectly


Untitled by P.J. Prendergast, on Flickr


some clips of me and ollie. i only got like 5-6 runs because i had to save my 16's for inspection and i wanted to save tires for limerock on the 17th. i drove home on cords throwing chunks of rubber lol it was bad, luckily it was only a 20 minute drive

https://vimeo.com/52793272

another video of all the action (bummed out i didn't make it lol probably because i was done so dang early)

https://vimeo.com/52868575

and a buddy of mine is giving me a set of kouki tail lights soon, i'm super pumped on that! other than that i won't have much of an update after the 17th as i'm studying abroad in dublin for my spring semester! my goals for when i'm back next summer is get as much drifting done as possible. i'm hoping to get a bolt in cage, a hydro hand brake and quick release for next season. then i plan on getting either version select (the 180sx rep stuff) or origin stylish. i'd love to find a pair of 18'' battles so i can do a 17/18 stagger but if i can't find em i really like he rota p45r's. they're nice looking wheels and i'm too broke to consider dropping like $2k on a set of works or whatever, so i gotta take the economical route for now!

[PJ Prendergast]

i'm sorry sir i cannot do that.

and i changed it up a bit. i've always wanted a set of these


IMG_3365 by P.J. Prendergast, on Flickr


Untitled by P.J. Prendergast, on Flickr


Untitled by P.J. Prendergast, on Flickr

i'm getting spacers for up front and i'm gonna drop it all the way when i'm back from school for this month's local drift event. gotta do that damn wire tuck first though

and eventually i'll stop taking iphone pics and use my camera once in a while lol

[mike-81-240d]

Looks real good, but get rid of the stickers please...

[PJ Prendergast]

... She's loud

[LaMaR-]

Nice its fun to slide around just need to learn to clutch kick more. Prob a few months I will swap either a SR in or a Rb25. We shall see

[PJ Prendergast]

hah it's all good man, looks fun! i plan on getting a 4 point bolt in cage and some brides this winter

[LaMaR-]

Nice man looks good, I picked up a fairly stock 240 3 days ago, had a shit exhaust, lowering springs and cai. Well Long story short, modified exhaust to fit better and sound better also allowing me to get lower. Interior now has my buckets in it with harnesses, still need a cage. Tein Coilovers and a set of 17" xxr's. Dont wanna jack your thread so heres one shot from today its really the only one I have till tomorrow anyway.

[PJ Prendergast]

blast pipes came today! i wish i brought my 240 to school i miss her dearly

i have some new idea's for the whip too, maybe when i start making some money this fall i can make this project move along a little faster but my overall goal is to keep her clean until i can import a gts-t from canada and make that into a real drift beater slut

[PJ Prendergast]

what are the specs on the rpf1's?, they look way better than the varrstoens, and cool drift shot, what are your rear wheel setup for drifting? looks like 350z wheels

they're 17x9.5 +18. and idk what those spares are, i yanked em off my dad's parts car stealth out back of our shop haha they have really nice tires on em too :p

Very clean build, I love those hood-less shots. Looks even better sideways. Keep it up!

thanks! and yeah man i love the hoodless shots lol i'll have some more sideways shots at the end of september, so pumped for next month's local event!

[Isuzupickup]

Very clean build, I love those hood-less shots. Looks even better sideways. Keep it up!