If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
For all wondering after a redid the front bumper it hasn't cracked/split or anything its perfectly done this time. altho im going to make a new one because this one is missing the tabs for the corners from being ripped off by a cop... yeah... and
my Entire Domani/Civic Conversion is coming off going in my room for the winter and shes going to look like a civic until spring so i can renew my insurance. pictures of that tomorrow, then comes the winter wonderland of collecting parts.
Pulled the Y8 outta the acura, starting more of these build this month in my other build theard
Then Pulled the Y7 outta the civic and put the Y8 in, Vtec swap because i blew the piston rings out of cylinder 1 and 3
Vtec in
Exhaust Repair, Shifter linkage change
My Resonator case has be smoothed right flat (low life)
Got a B16A TB (65MM i believe) Bored it and polished it to a spit shine, makes a difference bigger opening and polished makes a quicker throttle response
Then got my industrial done
Poped the dizzy in markam
Disassembled my GSR/SIR Rear suspension to get it ready for sandblast and Powdr coating
Started another custom bumper this time 2000 Celica Top, 2013 Camry Bottum
polished my momo
Bumper Ready for Sanding
then on to puddy and primer
Comment