Tweet
I did it again, Haggard s14 rebuild!
so i got an offer i couldn't refuse for my stock e36 on wheels and koni struts and springs build and my story is here ( http://www.stanceworks.com/forums/sh...ad.php?t=27781 )
so i came across this local ka-t s14 with a ton of mods and fun stuff. Ive missed drifting a lot this year and i'm going to get back on the track so here's my new S14!!!
Suspension
-Megan street coilover's (rear is drooped and has become more bouncier)
-isis toe arms
-Godspeed rucas
-isis solid subframe bushings
-welded diff
- s14 se rear sway bar
- Wagner ThermoQuiet rear brake pads from advance and rotors are still farely new
Interior
- nardi 330mm deep corn
-nrg quick release and short hub
- bubble shift knob
-sonic motor bride zeta 2 style seat with nagisa seat rails (less than a month in my car)
-jdm key ring light with red led bulb
- sunpro oil pressure gauge
-aem wideband
-autometer boost gauge
- sony head unit with ipod adapter
-custom fit 6x9 pioneer speakers in the back
- 6.5" pioneer speakers in the front
Exterior
- kouki side skirts and se lip
-ebay roof spoiler
- 30mm overfenders
- *Wheels are polished rota p45s 18x9.5 all around with 25mm spacer in the rear, but car will come with se's unless the right offer or price with wheels.
- muteki lug nuts
-6k hid's
-96 grill
motor (rebuilt and put in at beginning of febuary)
- new timing chain
- kings rod bearings and main bearings
- pistons and rings
- felpro head gasket
- head was done with new valve seals put in at j and y machine shop
- arp headstuds
-new water pump
-new oil pump
- alternator rebuilt last year
-isis radiator
-egr block plate
-new thermostat
- new front and rear seals
- ebay manifold
-mr gasket copper exhaust manifold gasket
- ebay downpipe with flex pipe( hole in the flex pipe from scraping)
-isis t25/t28 with new 3an oil feed has a warrenty till around august
-370cc injectors
-n60 maf
-legit greddy intercooler
-ngr type s bov( better than greddy , doesnt leak)
- rs enthalpy tune with jumper harness
-bn style short shifter
- spec stage 3 clutch
-f1 light weight fly wheel
-solid aluminum motor mounts
-apexi 3" n1 exhaust
-z32 fuel filter
-fujita air filter
-new power steering line
- battery relocated
- metallic purple powder coated valve cover
- bkr7e spark plugs
-new auto lite spark plug wires
-new knock sensor
now the stuff i need to fix.
install overfenders
front bumper and hood alignment
fix dent in the door/ replace the door if i find one for a good price
the KA is smoking a lot think its the rings so im going to rip it apart
then last but not least PAINT!!!!!!!
the rear tires are shot on the rotas so i got my drift spares on :p
so i came across this local ka-t s14 with a ton of mods and fun stuff. Ive missed drifting a lot this year and i'm going to get back on the track so here's my new S14!!!
Suspension
-Megan street coilover's (rear is drooped and has become more bouncier)
-isis toe arms
-Godspeed rucas
-isis solid subframe bushings
-welded diff
- s14 se rear sway bar
- Wagner ThermoQuiet rear brake pads from advance and rotors are still farely new
Interior
- nardi 330mm deep corn
-nrg quick release and short hub
- bubble shift knob
-sonic motor bride zeta 2 style seat with nagisa seat rails (less than a month in my car)
-jdm key ring light with red led bulb
- sunpro oil pressure gauge
-aem wideband
-autometer boost gauge
- sony head unit with ipod adapter
-custom fit 6x9 pioneer speakers in the back
- 6.5" pioneer speakers in the front
Exterior
- kouki side skirts and se lip
-ebay roof spoiler
- 30mm overfenders
- *Wheels are polished rota p45s 18x9.5 all around with 25mm spacer in the rear, but car will come with se's unless the right offer or price with wheels.
- muteki lug nuts
-6k hid's
-96 grill
motor (rebuilt and put in at beginning of febuary)
- new timing chain
- kings rod bearings and main bearings
- pistons and rings
- felpro head gasket
- head was done with new valve seals put in at j and y machine shop
- arp headstuds
-new water pump
-new oil pump
- alternator rebuilt last year
-isis radiator
-egr block plate
-new thermostat
- new front and rear seals
- ebay manifold
-mr gasket copper exhaust manifold gasket
- ebay downpipe with flex pipe( hole in the flex pipe from scraping)
-isis t25/t28 with new 3an oil feed has a warrenty till around august
-370cc injectors
-n60 maf
-legit greddy intercooler
-ngr type s bov( better than greddy , doesnt leak)
- rs enthalpy tune with jumper harness
-bn style short shifter
- spec stage 3 clutch
-f1 light weight fly wheel
-solid aluminum motor mounts
-apexi 3" n1 exhaust
-z32 fuel filter
-fujita air filter
-new power steering line
- battery relocated
- metallic purple powder coated valve cover
- bkr7e spark plugs
-new auto lite spark plug wires
-new knock sensor
now the stuff i need to fix.
install overfenders
front bumper and hood alignment
fix dent in the door/ replace the door if i find one for a good price
the KA is smoking a lot think its the rings so im going to rip it apart
then last but not least PAINT!!!!!!!
the rear tires are shot on the rotas so i got my drift spares on :p
I Love the ka-t too
Comment