If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
On the 1st of November our DropMode club had a closing season party called HelLowInKiev14.
We had a meet in Kiev, cruising in the city and a party all night long in the hotel in the beautiful forest. A lot of fun was there but a bit pity, as stance-season is closed and winter is near....
Three parts of report with a lot of pics you can see here:
Love the color combo man! Well done!
How do you like the fk coilovers? I have a set of fk highsport and i feel like they are a bit too soft lol
Thanks, bro!
I am pleased with my front suspension.
And for rear one, I replaced FK springs with Swift 22kg springs. Also I put TA-Technik bumbs on the shocks. Only then I was satisfied with the result of my rear suspenion.
et perfect fitment in the rear
your math skill on getting those to fit!
and you say you've upgraded to 22k swift springs so im sure it rides nice and doesn't bounce and rub in the rear. How did you go about finding correct size springs for the replacement... guide me here i'd upgrade my ultimos to 22k
P.S. I love this
Instagram?
YOUR BUILD + MARILYN E36 VERT + OH HIS NEW BUILD INKA = FAVORITE BUILDS
et perfect fitment in the rear
your math skill on getting those to fit!
and you say you've upgraded to 22k swift springs so im sure it rides nice and doesn't bounce and rub in the rear. How did you go about finding correct size springs for the replacement... guide me here i'd upgrade my ultimos to 22k
P.S. I love this
Instagram?
YOUR BUILD + MARILYN E36 VERT + OH HIS NEW BUILD INKA = FAVORITE BUILDS
Thanks for good words!)
Regarding springs, I solved the problem very easy, just bought 22kg variant using feedback from my friends. But the result is awesome, there is indeed no rub at the rear, even with two passangers there
as you can see, the outer lip for front will be 3" and outer lip for rear - 4".
So the final wheel's specs should be:
Front: 7" + 3" = 10"
Rear: 7.5" + 4" = 11.5"
I want to run 10's and 11.5's but I can see anywhere in your measurements about the 1/2" face?
as you can see, the outer lip for front will be 3" and outer lip for rear - 4".
So the final wheel's specs should be:
Front: 7" + 3" = 10"
Rear: 7.5" + 4" = 11.5"
I want to run 10's and 11.5's but I can see anywhere in your measurements about the 1/2" face?
Thanks in advanced!
Thanks!
All described is correct. 7" are front barrels and 7.5" are rear barrels.
You can't see 1/2" face because it is hidden under the barrel and doesn't change the width or the rim. (if i would like i can make them 7+0.5+3=10.5 and 7.5+0.5+4=12, but it is too much for e46, i measured)
Comment