Tweet
Joe's E36 Project
Hello,
Im Joe, ive just joined the forum, i have been reading and scanning this brilliant forum for a while, i just hadn't got round to signing up, so here i am!
It all started when i had a hankering for a E36, so when a 45,000m 1 owner Techno violet M kitted 318is popped up i had to have it.
I have been busy working on my car these past few weeks, so to start ill post up some progress pictures, i hope to add some proper pictures within the next week or so,
(apologies about the poor quality pics)
Before,
Engine cleaned, inlet manifold and cam cover painted,
M3 Front splitter with M tech centre mesh
Indicators lightly smoked, with new metal plates and surrounds
Headlight main beam tinted yellow
Kidney grills painted satin black
Twin exit diffuser replaced the single exit, a powerflow exhaust filled the gap (brackets needing adjustment!)
Coilovers were next, along with caliper painting and M3 EVO top mounts
A friend of mine had a E36 carbon fibre bonnet with bonnet pins for sale so i bought it, (needs a clean!)
Then a M3 Vader interior was fitted,
This is how the front sits at the moment on a slight incline, (apologies about the crap phone pics)
Oh the car is currently sitting on 8.5j Hartge wheels, i have added as much camber to the front as possible to clear the arches, with the evo top mounts and the washers behind the hub trick.
Front: et13 8.5j 205 40 17
Rear: et13 8.5j 215 40 17
The to do list:
Paint and fit M3 mirrors,
Fit Adjustable camber rear lower arms,
Thanks for reading my first post! and i hope to update shortly with some better pics.
Joe
Im Joe, ive just joined the forum, i have been reading and scanning this brilliant forum for a while, i just hadn't got round to signing up, so here i am!
It all started when i had a hankering for a E36, so when a 45,000m 1 owner Techno violet M kitted 318is popped up i had to have it.
I have been busy working on my car these past few weeks, so to start ill post up some progress pictures, i hope to add some proper pictures within the next week or so,
(apologies about the poor quality pics)
Before,
Engine cleaned, inlet manifold and cam cover painted,
M3 Front splitter with M tech centre mesh
Indicators lightly smoked, with new metal plates and surrounds
Headlight main beam tinted yellow
Kidney grills painted satin black
Twin exit diffuser replaced the single exit, a powerflow exhaust filled the gap (brackets needing adjustment!)
Coilovers were next, along with caliper painting and M3 EVO top mounts
A friend of mine had a E36 carbon fibre bonnet with bonnet pins for sale so i bought it, (needs a clean!
)Then a M3 Vader interior was fitted,
This is how the front sits at the moment on a slight incline, (apologies about the crap phone pics)
Oh the car is currently sitting on 8.5j Hartge wheels, i have added as much camber to the front as possible to clear the arches, with the evo top mounts and the washers behind the hub trick.
Front: et13 8.5j 205 40 17
Rear: et13 8.5j 215 40 17
The to do list:
Paint and fit M3 mirrors,
Fit Adjustable camber rear lower arms,
Thanks for reading my first post! and i hope to update shortly with some better pics.
Joe
Instagram@jdjurhuus
(( they donīt fabric that pattern any more , only if you are luckie to find someone that doesenīt know what is selling 
Comment