Tweet
Well I decided to go air because all of the coils for my car dont go low enough. Huge thanks to Matt Wobbleton because hes doing my install and also helped out a lot. Im still waiting on the rears...
Air Setup:
Airlift slam XL fronts
airlift rears
airlift shocks
accuair switchspeed
dual viair 400c compressors
2 viair dual needle gauges which are going in the center console in my newsouth gauge pod
5 gallon skinny tank colormatched
accuair water trap
dorbritz designs sway bar brackets
ksport adjustable front endlinks
Current mods:
AWE tuning exhaust
APR carbonio intake
15% tint
LED DRL's
my car and my dads FJ
Untitled by ripNdipMKVI, on Flickr
Untitled by ripNdipMKVI, on Flickr
my tank while it was being painted
tank by ripNdipMKVI, on Flickr
front plate removed by ripNdipMKVI, on Flickr
took off the old tint and resprayed my tail lights this time making them a cherry red and leaving the reverse lights
awe tuning exhaust by ripNdipMKVI, on Flickr
Untitled by ripNdipMKVI, on Flickr
Untitled by ripNdipMKVI, on Flickr
installed a APR Carbonio cold air intake thanks to my friend arty. just a quick rundown on what had to be done: we removed the front bumper, headlight and splash guard. then we took out the bracket holding the power steering fluid reservoir and the ecu or whatever it is called i dont remember what he said it was and then cut off the little nub thing on the right side that the bracket went into. we lowered the power steering line that comes up under the headlight. we put the ecu thing in between the battery and the box to the right of it then put the power steering fluid res. right behind the headlight infront. also we could only hook up the smaller inlet hose since there isnt a hole for the larger one but its been running fine without a cel and im going to put a mini filter on the larger one so its now just open.
here is a picture from while we were doing it. the small inlet hose is hooked up now and im going to put a small filter on the larger one so it isnt just open. also the stock airbox in front of the grill has been removed. i took this picture before we were completely done. all of the other pictures including the finished product are on my friends phone so ill post them once he puts them up.
APR Carbonio by ripNdipMKVI, on Flickr
i spent pretty much all of my money on my air ride so wheels are gonna have to wait. so i picked these up off my friend who painted my tank for 100 and hes gonna fix the curb rash and paint them.
b7 a4 17's by ripNdipMKVI, on Flickr
stay tuned for the final project...
Air Setup:
Airlift slam XL fronts
airlift rears
airlift shocks
accuair switchspeed
dual viair 400c compressors
2 viair dual needle gauges which are going in the center console in my newsouth gauge pod
5 gallon skinny tank colormatched
accuair water trap
dorbritz designs sway bar brackets
ksport adjustable front endlinks
Current mods:
AWE tuning exhaust
APR carbonio intake
15% tint
LED DRL's
my car and my dads FJ
Untitled by ripNdipMKVI, on Flickr
Untitled by ripNdipMKVI, on Flickr
my tank while it was being painted
tank by ripNdipMKVI, on Flickr
front plate removed by ripNdipMKVI, on Flickr
took off the old tint and resprayed my tail lights this time making them a cherry red and leaving the reverse lights
awe tuning exhaust by ripNdipMKVI, on Flickr
Untitled by ripNdipMKVI, on Flickr
Untitled by ripNdipMKVI, on Flickr
installed a APR Carbonio cold air intake thanks to my friend arty. just a quick rundown on what had to be done: we removed the front bumper, headlight and splash guard. then we took out the bracket holding the power steering fluid reservoir and the ecu or whatever it is called i dont remember what he said it was and then cut off the little nub thing on the right side that the bracket went into. we lowered the power steering line that comes up under the headlight. we put the ecu thing in between the battery and the box to the right of it then put the power steering fluid res. right behind the headlight infront. also we could only hook up the smaller inlet hose since there isnt a hole for the larger one but its been running fine without a cel and im going to put a mini filter on the larger one so its now just open.
here is a picture from while we were doing it. the small inlet hose is hooked up now and im going to put a small filter on the larger one so it isnt just open. also the stock airbox in front of the grill has been removed. i took this picture before we were completely done. all of the other pictures including the finished product are on my friends phone so ill post them once he puts them up.
APR Carbonio by ripNdipMKVI, on Flickr
i spent pretty much all of my money on my air ride so wheels are gonna have to wait. so i picked these up off my friend who painted my tank for 100 and hes gonna fix the curb rash and paint them.
b7 a4 17's by ripNdipMKVI, on Flickr
stay tuned for the final project...
Comment