Announcement

Collapse
No announcement yet.

MK6 Jetta 2.5

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ripNdip
    replied
    heres whats been going on this weekend. still dont have the bagyard rears.


    Untitled by ripNdipMKVI, on Flickr


    Untitled by ripNdipMKVI, on Flickr

    floor still needs the cutout for the tank and to be wrapped. also you wont see the piece of wood in the back once the tank is in.


    Untitled by ripNdipMKVI, on Flickr


    Untitled by ripNdipMKVI, on Flickr
    i still a notch and adjustable front endlinks to get it to lay frame.
    Last edited by ripNdip; 01-29-2012, 12:49 PM.

    Leave a comment:


  • ripNdip
    started a topic MK6 Jetta 2.5

    MK6 Jetta 2.5

    Well I decided to go air because all of the coils for my car dont go low enough. Huge thanks to Matt Wobbleton because hes doing my install and also helped out a lot. Im still waiting on the rears...

    Air Setup:
    Airlift slam XL fronts
    airlift rears
    airlift shocks
    accuair switchspeed
    dual viair 400c compressors
    2 viair dual needle gauges which are going in the center console in my newsouth gauge pod
    5 gallon skinny tank colormatched
    accuair water trap
    dorbritz designs sway bar brackets
    ksport adjustable front endlinks

    Current mods:
    AWE tuning exhaust
    APR carbonio intake
    15% tint
    LED DRL's

    my car and my dads FJ

    Untitled by ripNdipMKVI, on Flickr

    Untitled by ripNdipMKVI, on Flickr

    my tank while it was being painted

    tank by ripNdipMKVI, on Flickr


    front plate removed by ripNdipMKVI, on Flickr

    took off the old tint and resprayed my tail lights this time making them a cherry red and leaving the reverse lights

    awe tuning exhaust by ripNdipMKVI, on Flickr

    Untitled by ripNdipMKVI, on Flickr

    Untitled by ripNdipMKVI, on Flickr

    installed a APR Carbonio cold air intake thanks to my friend arty. just a quick rundown on what had to be done: we removed the front bumper, headlight and splash guard. then we took out the bracket holding the power steering fluid reservoir and the ecu or whatever it is called i dont remember what he said it was and then cut off the little nub thing on the right side that the bracket went into. we lowered the power steering line that comes up under the headlight. we put the ecu thing in between the battery and the box to the right of it then put the power steering fluid res. right behind the headlight infront. also we could only hook up the smaller inlet hose since there isnt a hole for the larger one but its been running fine without a cel and im going to put a mini filter on the larger one so its now just open.

    here is a picture from while we were doing it. the small inlet hose is hooked up now and im going to put a small filter on the larger one so it isnt just open. also the stock airbox in front of the grill has been removed. i took this picture before we were completely done. all of the other pictures including the finished product are on my friends phone so ill post them once he puts them up.

    APR Carbonio by ripNdipMKVI, on Flickr

    i spent pretty much all of my money on my air ride so wheels are gonna have to wait. so i picked these up off my friend who painted my tank for 100 and hes gonna fix the curb rash and paint them.

    b7 a4 17's by ripNdipMKVI, on Flickr

    stay tuned for the final project...
    Last edited by ripNdip; 04-12-2012, 10:35 PM.
Working...
X