The Grandmabile.

[kbuss]

I like that sticker with the state of Michigan (glove) holding the gun, never seen that before.

Cars looking good.

[Granny Gold]

I like this alot....

Thank you. Can't wait to have it done and driving again!

Should pull the bolts off the wheels for the lols.

Haha. Good ole' fake splits.

Donde esta el oro?

On my car, duh.

[Nickgt40]

Donde esta el oro?

[Oxer]

Should pull the bolts off the wheels for the lols.

[mike-81-240d]

I like this alot....

[NorCalFocus]

Grandma gold never looked so good.

[Granny Gold]

Tonight, I had my friend who owns a detailing company, Mirror Image Detailing in the Kalamazoo area for any locals, start my paint correction tonight. For those that don't know what that is, it basically is a full polish with a polisher to remove the swirl marks that develop from washing your car, small dirt, and everyday driving. Bring A LOT of the clarity back to the paint. Also picked up some Grade 8 hardware for the ORP I'm currently awaiting from Keegan Komponents . The small bolt to the far right is for the clamp on my rear camber arm. Onto the pictures!



What we started out with, hard to tell much difference by just the pictures.





Doing work.









Passenger fender after correction.



Hood after correction.



A few more before pictures.















That's all I've got for now! More pictures once the car is finished with the correction.

[NorCalFocus]

I think you have room to roll your fenders still buddy.

[Granny Gold]

Thanks!

[FunfGang]

Lookin good! I love the new look.

[Granny Gold]

Went out and worked on the car for about an hour today, trying to add some more camber in the back. As I suspected, everything was froze up after only 2 winter exposures.

Had to cut the nut off that holds everything tight, and then I got the stuff to break free. Only did the passenger side for now, as that's all I had time for. I'm not sure if I have too much, or not enough camber yet, but I'll be able to tell once everything is tightened back up and I have the chance to drive it around. I only have three crappy cell phone pictures for now.. I forgot my camera.

[Granny Gold]

Would get out there to work on the car, and provide some more updates. But we just got about 10" of snow the other day, and the drive to our shop hasn't been plowed yet.

[Granny Gold]

Why not opt for the 9's? I forget if the offset is too low for you.

They make them in 9's in an offset that would work, but they don't make them in my bolt pattern.

[Shocktech102]

Why not opt for the 9's? I forget if the offset is too low for you.

I don't think they have 17x9 in our bolt pattern.

-Matt

[G535]

he's already on 205/40s on a 8" rim, isn't that good enough? not everybody wants the skinniest tire possible.

205/40s on a 8 is fine. Its the Feddys that fit quite bulky...noticed that when my GF needed new tires and got 595s...