Announcement

Collapse
No announcement yet.

NZ Ke70 sedan build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NZ Ke70 sedan build

    Got a 83 4 door ke70 im building up.
    Its been sprayed silver pretty much standard atm, RF gaurd is bare steel with a rusty look. Im thinking get my steel rims widened to 13x8 or 13x9? Might just go with 8's and use spaces if i need to. Want to spray them flouro green,pink or something different let me know what you think.
    As for the lowering its already got lowering springs and shortened shocks all round but im guessing its gona have to go alot lower, so in the back was going to find some real short shocks and cut the springs and cut the bump stops down to suss that. And in the front was going to shorting the strut and add adjustable camber tops.

    Let me know what you guys think,wanting something different than the typical corolla over here so post pics etc to give me ideas.

    Will get pics up soon as possible

    Cheers

  • #2
    Here are some pics

    Front

    Old jdm ex lancer i swapped it for.


    Just sorting out wheels for it and
    going to ditch side mirror and put some fender mirrors on it.
    Last edited by Rotating; 12-11-2011, 03:55 AM.

    Comment


    • #3
      if you want something different then don't go with steelies

      Comment


      • #4
        Yea i found these
        http://www.trademe.co.nz/motors/car-...-430278850.htm
        Or maybe some work equip 03's not to sure
        Last edited by Rotating; 12-11-2011, 04:08 AM.

        Comment


        • #5
          go with the Work Equips

          Comment


          • #6
            Can only find a pair atm, and price is real dear compered to what i can get steels widened for

            Comment

            Working...
            X