Welcome to StanceWorks
Announcement
Collapse
No announcement yet.
Clean and Classy: Tecnui's Slammed 1986 Mercedes 190E W201
Collapse
X
-
Originally posted by Tecnui View PostPeople Like all of you Digust me.
The complete lack of moderation and the allowance of posts like these to continue is completely disgusting. **** is one thing. But the verbally abusive feedback, Invasion of privacy, and just downright hostility that comes out of the people on these forums is outright. WRONG. I dear say goodbye to not a community of Stance lovers, But to a community Antagonist Pigs.
- JacobOriginally posted by Jesus Christhe mustve enjoyed that bj.
i know for a fact you chubby bitches could suck the air bubbles out of a brake line
Comment
-
Originally posted by Tecnui View PostPeople Like all of you Digust me.
The complete lack of moderation and the allowance of posts like these to continue is completely disgusting. **** is one thing. But the verbally abusive feedback, Invasion of privacy, and just downright hostility that comes out of the people on these forums is outright. WRONG. I dear say goodbye to not a community of Stance lovers, But to a community Antagonist Pigs.
- Jacob
Comment
-
Tags
banned from pnw., death by skidplate, gay butthole welds, gf sticks up 4 me, i want 2 hug pandas, pussy-ass-bitch-kid, steelies+benz=classy, we hug pandas, your tears feed us
really??? hah
Woody, Yes I was talking about Tecnuis corolla, that thing looked dangerous....Imagine if something hit that open driveshaft goin through the center of the car, or it exploded...?
Comment
-
I can definitely agree with you on the safety thing, but then again, that's exactly why it's in a junkyard. He had to many people just dissing it instead of saying anything useful that instead of giving a shit about fixing/finishing it or caring about learning how to do it the right way that he gave up on it. I drove that car once and honestly it felt pretty solid and straight. It really suprized me.
That's exactly what's happening again it seems like and that's exactly why he not even dealing with it.
Comment
-
I'd really like to see this guy give a shit about learning to fix it, rather than giving up. He has some hairbrained ideas that could be real breakthroughs, and he goes and gives up on them.
Originally posted by JershRT changes lives.
Comment
-
Originally posted by cykelpump View PostI joined recently cause I thought this was a serious forum, but now I'm not so sure anymore, hope I'll get proven wrong but this looks like the comment thread of break.com
(no offence)
The problem with this thread is the attitude of the OP and his work. Even if people post horrible builds with bad quality/stupid decisions/retarded themes, people don't **** on them. You will get tons of comments with true opinions, but once you starting giving attitude, you most certainly will get it back, and much harder from many more people.
Comment
-
Originally posted by electricalbox View PostCheck out the rest of the forum, especially other builds. SW is a great forum, and the "open-mindedness" and respect are very dominant across the board.
The problem with this thread is the attitude of the OP and his work. Even if people post horrible builds with bad quality/stupid decisions/retarded themes, people don't **** on them. You will get tons of comments with true opinions, but once you starting giving attitude, you most certainly will get it back, and much harder from many more people.
Comment
-
Originally posted by cykelpump View PostI joined recently cause I thought this was a serious forum, but now I'm not so sure anymore, hope I'll get proven wrong but this looks like the comment thread of break.com
(no offence)
If I did a modification to my car that could result in the serious injury or death of myself or others (such as welding something to your sway bar), then I would want to be yelled at incessantly until I removed it.
StanceWorks is generally a very welcoming place and there's a lot to learn here. You just have to make sure your fabrication/building/design skills are up to par before tending towards the arrogant side of things, especially if you're trying to tout them as being above average.
While it is warm and fuzzy most of the time, people here take things like pompousness and safety very seriously. You'd be hard-pressed to find a forum that wouldn't react in such a manner to seeing a skid plate welded to a sway bar. It's so incredibly dangerous, and his reaction to that is what set a few people off here.
But welcome to StanceWorks!
www.fluidmotorunion.com
www.stanceworks.com
Originally posted by OxerI'm pretty sure I will molest any exhaust systems you leave lying around
Comment
-
Originally posted by Woody View PostDamn, you got me!
All I own are corollas, not mercs.im josh. i have a supra
Comment
-
Originally posted by FluidMotorUnion View PostWhile I can't vouch for anybody's actions here, I will say this:
If I did a modification to my car that could result in the serious injury or death of myself or others (such as welding something to your sway bar), then I would want to be yelled at incessantly until I removed it.
StanceWorks is generally a very welcoming place and there's a lot to learn here. You just have to make sure your fabrication/building/design skills are up to par before tending towards the arrogant side of things, especially if you're trying to tout them as being above average.
While it is warm and fuzzy most of the time, people here take things like pompousness and safety very seriously. You'd be hard-pressed to find a forum that wouldn't react in such a manner to seeing a skid plate welded to a sway bar. It's so incredibly dangerous, and his reaction to that is what set a few people off here.
But welcome to StanceWorks!
Comment
-
lol at the direction this entire thread took.
Some posts were out of line, but the majority were pretty funny.
To whoever ripped on my car, I don't give a fuck. I'd rather drive a Kia lowered the right way instead of a beat ass Benz on cut springs.
Comment
Comment