c5 a6 4.2

[Madhatter]

sweet, i like the rotiforms, but not really bought on colors.

[Chuckdee]

I almost thought about getting a c5 at one point, wasn't much support (info, aftermarket products, etc.) for them so I had to let that one go. It's looking great, none-the-less!

[ilikeaudis]

Here's some unedited pics the others were off my phone

[ilikeaudis]

Progress is starting to be made. These will be on this weekend.



Going with coils for more lows this year while acquire air parts.

These also came in C6 S6 DRL's and I started fitting them in the bumpers




And a roller courtesy of my buddy Parker

[softg]

nice c5, jealous of the room in those fenders, I'd love to run et0 on a 9.5 in the rear on my 2.7t

manual? interior shots? excited to see the doors and bumpers shaved

love the comparison with the 4.2 blades and the rs6 skirts

[P78]

sweet rolling shot

[ilikeaudis]

Not manual yet (when the tranny finally let's go it will be) its got
The sport interior I'll try to get some shots of it! Doors shaved might not happen as I can't do it and cheapest quote so far was $200 a door without paint :/

Heres an old interior shot when I had wrapped the trip with grey suede.

[Mr. Rictus]

Was coming in here to tell you to get ST coilovers! They're definitely the best bang-for-your-buck coilovers you can get for the C5. You'll love the coils, but be sure to get adjustable upper control arms for camber adjustment. Look into the Stern upper adjustable control arms. You can get them from Achtuning but they're backordered until the beginning of April. Also be prepared for your front upper and lower control arms to wear out fast if they're not adjusted properly when you lower the car. Be sure to check your rear toe arms for wear otherwise your rear tires will be scrubbed of tread in no time!

Where'd you get the RS6 skirts? I need a set for my S6.

[ilikeaudis]

Thanks for the info! Been looking into the control arms. Was planning to replace the whole front in the near future anyway. I picked up the skirts from a user on audizine who unfortunately totaled his car. Got his trunk too! Smokin deal I was super lucky!

[ilikeaudis]

Quick on/off magnetic plate holder

[ilikeaudis]

Lights cut in the majority of the way and plate holder works

[ilikeaudis]

Ordered my coilovers through ECS and they were a direct ship item from KW and I received a tt/r32 setup so somebody screwed up. Needless to that install didn't happen this weekend!

[244Brick]

Dammit!!! i **** that.. it's like your only job is to see that i get the parts that i ordered and they screw it up.. its so aggravating

[ilikeaudis]

At least I got the fenders started this weekend. Here's a before and after of the rears. The roller was able to push them out pretty far. Still needs some more work but you get the point.

[ilikeaudis]

Coilovers are on and fenders are pushed out in the rear. Need to get summer tires on so I can go lower and need some spacers for the rear.