Update:
Left to do:
Then I should be able to drive it around.
- installed shift linkage and shifter
- installed exhaust
- installed passenger axle and bolted right suspension back together
- bled brakes and clutch (might have a sticky caliper, but I'll deal with that later)
Left to do:
- install half shaft and driver side axle
- fill transmission fluid
- wire in oil presure sensor
- remove heater core bypass hose and install OEM setup for heat
- remove exhaust (too short, needs flex pipe and don't want it hanging and getting caught on anything)
- install headlights and some other lighting connectors
- install battery tray and battery
- set timing
Then I should be able to drive it around.
Comment