You should post one of the original pictures above it to show how it has "matured" =)
Announcement
Collapse
No announcement yet.
Just a Truck.
Collapse
X
-
-
Here it is... From what i was told, there are more epic ones that still need to be edited.
Drag Sesh 01 by Cole Lenhart, on Flickr
Skat'n across the highway...
Laid Out 01 by Cole Lenhart, on Flickr
Last edited by way2fastx3; 10-23-2014, 10:09 AM.
Comment
-
Here is a quick pic from my IG after i installed the wheel.
Check and Mate. by Cole Lenhart, on Flickr
Now in order to get the bubble knob to work i need to get a custom column shifter made.
Comment
-
Ladies and Gents, i introduce you the new 2015-2016 powerplant for the truck!
2015-2016 New PowerPlant. by Cole Lenhart, on Flickr
Looking at a 2JZ - GTE with a A341E Auto Trans with about 60k miles on the entire setup that was pulled out of a Toyota Soarer
NOW... this build is going to be slow, a learning curve and much more. I'm not looking to start doing the swap UNTIL i can get ahold of a garage to do it in. I refuse to do this on the side of my house ESPECIALLY with winter coming quickly through Pennsylvania.
I have to do alot of brainstorming since this will be a custom build in itself and i will have to use as much of my connectionsfirneds as i can since i don't have any of the machines needed to pull this build off "correctly". The engine is going to sit in my basement and covered until i can find a garage to rent out and start the build.
Comment
-
Looks pretty damn clean=)
Comment
-
I think the guy who bought my m3 said he has a guy who can make up just about any trans adapter for those motors.My super boring build http://www.stanceworks.com/forums/sh...other-M3-buildInsta Mintyhinrichs
Comment
-
-
Here are the last few shots from a mini shoot...
IMG_2136 by Cole Lenhart, on Flickr
IMG_2118 by Cole Lenhart, on Flickr
IMG_2125 by Cole Lenhart, on Flickr
IMG_2143 by Cole Lenhart, on Flickr
Laid Out 01 by Cole Lenhart, on Flickr
Here is a throwback picture from the first show i took it to when it was done...
Wine-Dragger-2014 by Cole Lenhart, on Flickr
Comment
-
Woahh it's been awhile since i updated this! Welp, as some of you may know, i'm from the good ol' state of Pennsylvania where we get our wonderful 4 season! Not... so the trucks status is what is pictured below. Currently i am in the process of trying to find storage or possibly even a garage to work on it during the winter. If i can't get anything well it looks like i'll be a bored dude for a few months. Here are a few things to look forward to come spring/summer time.
- Convert the truck over to Hard/Copper Lines
- Seamless Air Tank
- Fuel Cell
- New Wheels (Already Have)
- New Seat's w/ Harnesses
- Put the Interior back together
- Engine Bay Cleanup/Delete
- Weld in 3rd Brake Light
- Weld shut "Water Traps" on roof
- Shave Antenna
- Blah Blah Blah....
Now for the Engine, i backed out of getting the 2JZ... I know, I know, bad decision BUT since the truck run's healthy as is with the little 2.2 thats in it, i rather focus on the rest of the things that need to be done to the truck, like bodywork/paint before i put a new powerplant in it. Im still on the edge over a few powerplants to put into the truck. I figure it will be the last thing to do UNLESS i lose my transmission/engine at some point.
I'm really looking forward to just driving it, and enjoying it as come spring time for shows.
Summer Time Sadness by Cole Lenhart, on Flickr
I did manage to pick up a GMC Sonoma Hood for FREE! So i put that on the truck. I don't have any after pictures cause it started to get dark but ill post some later.
Untitled by Cole Lenhart, on Flickr
In the process of the swap..
Untitled by Cole Lenhart, on Flickr
I'll keep updates coming when ever i feel its worthy enough to post.
Comment
-
Comment