Slammed on BBS

[Dr.AK]

I'm in love.

[Dutchy]

Sorry for the delay, been busy with work, social life and of course getting the car together.

Did some more fender work today with the good ol' dolly and hammer. Over all shape is about done, just gotta smooth them out before I start prepping the car for paint.

Still need to finish my euro trims to put them on too.

Here's some pictures to keep you guys interested :P

[Dutchy]

So new tires were fitted today, 205/50 out back, 195/50 up front. fronts were perfect, rears are too big. The tires didn't stretch like I thought they would.

Now I am widening the rear fenders by about a half inch, which means I will be painting the whole car. I need to do more work on it and then start prepping for paint.

Will have some pictures tomorrow.

[Norcals52]

Good stuff. Cant wait to see it!

[SeanDub]

Hurry

[grippymonkey]

coming along...

I'm in love with E30's. I've had two.

[B Rod]

Sounds good. Cant wait to see it!

[Dutchy]

Tires are coming in tomrrow morning, mounting them tomorrow after work.

Also started on modfying another set of struts, just need to weld on a new seat for the coilover sleeve.

I rolled the fenders front and back. Also pulled the front fender liners.

Now just need a stiffer spring for the rear and it should be good to go.

[Dutchy]

205 is bigger then stock size anyways :P

[driggers.a]

All about the looks. A+

[Dutchy]

I don't do boost :P

205's I know, but think cambered in and as low as possible

[driggers.a]

The fronts are as rolled as flat as anything. The rears will likely require some cut-off wheel action and some welding.

Currently talking over a 2.7 stroker motor/paint engine/paint car idea with my buddy.

With 205's out back, lawlz.

I've got a turbo that would put an M20 above any 2.7 stroker

[Dutchy]

Oh yay! A good flare on those rear fenders will help you too...

The fronts are as rolled as flat as anything. The rears will likely require some cut-off wheel action and some welding.

Currently talking over a 2.7 stroker motor/paint engine/paint car idea with my buddy.

[driggers.a]

Oh yay! A good flare on those rear fenders will help you too...

[Dutchy]

So I test fitted 195/55R15's up front and out back on the 9's. Decided to go with a 205/50 out back and 195/50 up front. Back is coming down about a half inch ( was almost sitting on the tire with the 195 on the 9 ) and the front is coming down a good inch to two inches.

Going to do work and get another set of struts welded up and in the car asap.