Check out my warehouse!!!!! Long Island NY

[MikeG]

I am definitely interested in some bbq with local LI peeps

[TheArkitekt]

awesome workspace! wish i could find something like it in my area. I would probably just live there

[Nevaland9]

Check out what we just got for shop car #2

more to come.

[Nevaland9]

Heres a little teaser after i finally got tires for the rears.
265/35/18 on a 18x12.5, i didn't realize how intense of a stretch it would be. After getting it nice and wet, inflating, deflating, over inflating and repeatedly bouncing over 6ft in the air with 90psi plus a little torch action, I'm pretty close to getting the bead to seat on the lip. I think i just need to put a few miles on the car and we should be good.




I plan on mounting the over fenders this week, can't wait to see how the copper rivets look on the battleship silver vinyl. We still might change up the color combo for the wheels, maybe brown on bronze....well see.

Forgot to mention i sold the porsche today . No time for another project at the moment, might jump back into my original LSx Z33 idea.

[Interlagos boy]

sick cars

[Nevaland9]

Started riveting the over fenders on...rear camber is almost maxed out and coils are pretty much as low as they go.
I want to get all four wheels on and level the car out before i decide how much I'm going to arc the over fenders.
Its going to be a tight squeeze, the beads havnt even completely seated to the front barrels yet.
Im hoping to have most of the car assembled by tonight, its 8:25am and i just got back from an all nighter at the shop. time for a power nap then back to work.

[Littlejoey]

Get any gopro footy from the autox thing?

[Nevaland9]

Finally uploaded real pictures of whats been going on the past few weeks. Just finished dp,jb4,fmic,intakes and clutch delay valve delete on a buddies 335i, pretty sweet cars the power is so smooth its creepy. Ill get some pics later this week.

Better pics of the S13 in not ride height. put 235/40s on the fronts, kind of disappointed in the stretch..might swap out for 225/40 soon. Also the copper rivets are way too small, im super disappointed in that. Scrapped the "Vinyl wrapping the lips" idea, after messing one up after it was completely wrapped and removing it proved to be a multiple day task. Im going with a good old fashioned rattle can for the barrels and lips, pics later..you should lke the color.





We also decided to rice out the mustang with a carbon wrapped roof and trunk section and then we wood grained the interior trim. I think it came out awesome, we need to do the roof over tho.

Dont mind the fingerprints



my emo pic.










Woodgrain interior..thinkuing about doing the steering wheel also or a nardi, well see. Maybe if im feeling nice ill let him borrow the red leather brides








So ive been dying for a pushrod for years now, I had my heart set on doing an LS1 in the 911 i just sold. I got an offer i couldnt refuse so i let her go but the next day i found a deal i couldnt let pass up. Im not a fan on buying other peoples swaps and projects but i couldnt pass this one up, it needs a little work but once im done its going to be awesome.









yea...LS1 Rx7 from a Club loose member in the tri state area. Its got a pretty stock LS1 with LS6 intake manifold, BBK long tube headers to a 3" Y pipe to 3" straight pipe. The car has all the good control arms and such...just not a fan of hte BC coilovers. If i keep it i have some really sick plans for it but i truly want the porsche.
Ive got a few things i need to clean up with the fuel and clutch lines. Also refine the interior and definitely load up with some sound deadening. Seriously humoring the idea of widebody with a kit and wheels similar to the S13 and wrapping it white....but i might just put a rotorary back in it, sell it and keep the power train to put the LS1 in a porsche... so torn. :violin:

[SinlessVillainy]

That place looks awesome! I wish I had a sweet setup like that to wrench.

[Nevaland9]

Anyway...im bored and was digging throughout my photobucket and found some cool stuff i don't think ive ever shown you guys.

Heres some pics of my dads Pulsar GTIR in canada.
Cusco Coilovers, Apex cat back, SSQ, boost controller etc...small stuff but he loves it. I tried to get him to get with the flushness but the best he would do is 15x8 et0 and he refuses to go any lower. If anyones in the Ontario area check him out, he taught me everything i know, really awesome guy.







Heres the only vehicle ive ever bought brand new. 2010 Ducati Monster, the same week i got all my parts on/painted for the look i was going for the bike caught on fire while running in my garage. She only had 600 miles, i was so disappointed/relieved. It was my second bike and it only took me a few weeks to realize its way too slow and not the kind of bike i was looking for. This winter I'm going to try to get my hands on a Ducati 848 :blah: Heres the Monster.






Stock with my girlfriend(note her shirt)


One day, ill build one better

[the jank]

So jealous it isn't even funny.

[Nevaland9]

so i decided agains the vinyl wrapping of the wheels. I decided to spray bomb them. I went with a Metallic Copper for the lips and i have gone though at least 6 different other test colors (brown, purple/brown and a flower pot clay color. None pictured) Im now stuck between two colors. This Flat primer moss green and a super Metallic Dark Bronze. Im most likely going to do the bronze but something about the green contrasts so well to me.

[Nevaland9]

17x9.5 18x10.5 +15





GoPro action in the RX7....not a huge fan of the chassis, I'm going to adjust the shock travel (with out raising the car) and adjust the dampers. They're set how the previous owner set them...like shit, stiff in the back softer in the front..should make it a little more controllable

http://s138.photobucket.com/albums/q271/Nevaland9/LS1%20RX7/?action=view&current=720p-1.mp4

My first time out with her, i know i drift like shit. Give me a break.

http://s138.photobucket.com/albums/q271/Nevaland9/LS1%20RX7/?action=view&current=720p-4.mp4

[hinrichs]

i think the green is perfect with the copper, the bronze is just too close

[Hissn Like A Rattle Snake]

Bimmer love?

I hear you have a pretty sweet 335i you just worked. Any details?