94 Del Sol si build

[Walnuts]

Well fml tires went up 11 dollars over night each. guess I'm looking somewhere else

[Walnuts]

Had a couple good friends over last night and we started shaving the bumper in preparation for a big meet in Omaha Nebraska the 28th.

[Walnuts]

Going to be cutting the shock tower to get more low in the next couple days.

[Walnuts]

New tires coming in tomorrow, should have them mounted as well as cut front shock towers thursday. Will be much lower

Currently sitting at 2.5" at the jack points or just a smidge over a factory honda key if you have one to see how low it is. Shooting for another inch down lol

[FittedDownLow]

sweet cutting strut towers is fun here's a basic idea if you need one

i have to cut more because my control arm still hits, but i may be sectioning my spindle so idk yet

[Walnuts]

How she currently sits. Body work on the bumper should be finished Thursday as well. It now has aux lights instead of just empty holes as you can see in the pictures.

[Walnuts]

sweet cutting strut towers is fun here's a basic idea if you need one
i have to cut more because my control arm still hits, but i may be sectioning my spindle so idk yet

Yah it'll be fun to say the least. My friends just happy he gets to use his dremel.

[FittedDownLow]

dremel might take a bit i forget if there is 1 or 2 layers of sheetmetal, i'd recommend an angle grinder or a grinder with a cutting wheel if those are available if not the dremel will work after a few wheels and some time lol

[Walnuts]

dremel might take a bit i forget if there is 1 or 2 layers of sheetmetal, i'd recommend an angle grinder or a grinder with a cutting wheel if those are available if not the dremel will work after a few wheels and some time lol

Sadly I don't have a grinder

[Walnuts]

Why must the man in the brown truck tease me? He's driven by at least twice and hasn't dropped off my tires yet

[Walnuts]

Looky what came in.
My 175/50/15 vs a 205/70/15

[daspanda]

those are skinny dude, they are going on 15X9's ??

[Walnuts]

those are skinny dude, they are going on 15X9's ??

15x8 this is what they will look like. Except my wheels are 25mm farther out

[Walnuts]

Before:



Comparison:


After:

Needs less pull on the fenders less camber and more low

[Walnuts]

[ame="http://www.youtube.com/watch?v=NOOzysjItvk"]YouTube - MVI 0133[/ame]