Tweet
Been on here for a while when I started my Build thread on a Seat Leon tdi I had now I have sold that and got myself a Golf mk4 GTI 20v non Turbo as im 19 and insurance was over £1500 cheaper than the 1.8t
Started as a complete standard car
The next day I put it on coilovers and RS4 wheels wrapped in 215/35/18 and gave the paint a detail
After a month or 2 I decided to sell the RS4's and got some Lm's 18x9 all round
But on the same day me and my girlfriend see a nice place we wanted so the Lm's went and the deposit was put on the new place and the golf stayed on standard wheels for a few months while we settled abit
I then got a little bit of love for the car again and bought some 17" TT ronals chopped off the ARB, wound the coillies all the way down and added some engine spacers .. still managed to crack the sump tho
Also bought some Black projector headlights with 6000k HIDs
I bought some Blue centred recaros but the girlfriend is pregnant so I bought a recaro baby seat which didnt match the interior so I changed the interior to black and grey recaros so the baby seat matched haha , I also wrapped the centre consol in Carbon vinyl
Seeing as the snow had stopped here in the UK I bought a set of wheels I thought could work
And then set about spraying them myself and wrapped the dish's in chrome vinyl
But got bored of them very quick and found the new wheels that were for me , got a set of 5 wrapped in 215/35/18 falkens they are 18x8.5 all round Keskin KT1's
And thats where im at right now
I have done a Photoshop of my future plans which are :
Wheels sprayed in VW Black magic with orange bolts
Orange calipers - thinking about 312mm brakes up front with some grooved and drilled
discs and redstuff pads as the original brakes just aint cutting it for me
US spec front bump strip with us side markers and Uk pov spec side repeaters and rear lights
Here in the uk there is a group called stance solutions that have a Air ride kit just for the front that sits ontop of the coilovers and gives a 20mm extra drop and 50mm lift so I will be adding this next month and playing about with the stance to get it spot on
will be keeping the standard front and rear valances for now but I will be adding anni skirts
Here is the chop
Keep an eye out for future updates
Hope you all like so far
Started as a complete standard car
The next day I put it on coilovers and RS4 wheels wrapped in 215/35/18 and gave the paint a detail
After a month or 2 I decided to sell the RS4's and got some Lm's 18x9 all round
But on the same day me and my girlfriend see a nice place we wanted so the Lm's went and the deposit was put on the new place and the golf stayed on standard wheels for a few months while we settled abit
I then got a little bit of love for the car again and bought some 17" TT ronals chopped off the ARB, wound the coillies all the way down and added some engine spacers .. still managed to crack the sump tho
Also bought some Black projector headlights with 6000k HIDsI bought some Blue centred recaros but the girlfriend is pregnant so I bought a recaro baby seat which didnt match the interior so I changed the interior to black and grey recaros so the baby seat matched haha , I also wrapped the centre consol in Carbon vinyl
Seeing as the snow had stopped here in the UK I bought a set of wheels I thought could work
And then set about spraying them myself and wrapped the dish's in chrome vinyl
But got bored of them very quick and found the new wheels that were for me , got a set of 5 wrapped in 215/35/18 falkens they are 18x8.5 all round Keskin KT1's
And thats where im at right now
I have done a Photoshop of my future plans which are :
Wheels sprayed in VW Black magic with orange bolts
Orange calipers - thinking about 312mm brakes up front with some grooved and drilled
discs and redstuff pads as the original brakes just aint cutting it for me
US spec front bump strip with us side markers and Uk pov spec side repeaters and rear lights
Here in the uk there is a group called stance solutions that have a Air ride kit just for the front that sits ontop of the coilovers and gives a 20mm extra drop and 50mm lift so I will be adding this next month and playing about with the stance to get it spot on
will be keeping the standard front and rear valances for now but I will be adding anni skirts
Here is the chop
Keep an eye out for future updates
Hope you all like so far
Comment