Idk if it works yet lol. My research shows it will though. RealOEM shows the same gland nut size for ix's so I assume the diameter is the same; I called up BAVauto and asked them to measure the shock for me and it was about 3 inches shorter.
I plan on shortening the housings the full 3" so I don't need a spacer, then welding the spring perches up 2" on the housing so it ends up an inch lower than it was with an inch more travel.
I'll definitely do a writeup if it works.
I plan on shortening the housings the full 3" so I don't need a spacer, then welding the spring perches up 2" on the housing so it ends up an inch lower than it was with an inch more travel.
I'll definitely do a writeup if it works.
Comment