My multiple car builds!

[Stringbean]

Please no hattin lol

1994 Camry Coupe rare (bought for 2000$)

Things that have been done!
6000K hid's
clear side markers
full audio system
- 2 12" Clarion PXW 1252
- Legacy 1200W mono (saving for a better one, got this for 50$)
- Energy 6.5 convertible
- Clarion 6x9 rears
- JVC double din
- Mei 4ch 600w
- dual batteries
Lots and Lots of led's
white #194 dash bulbs
custom 2.5" cat back exhaust no muffler, just 2 resonators
injen sri (looking to buy AEM CAI)

Things to come

RMM front racing air dam (next to buy)
side skirts (gotta find some that'll fit)
gen 4 rear body kit
Ksport coilovers
nexen n3000 tires on new 18X8 MBBoost wheels (coming this summer)
with a little: Stretch, poke, tuck and roll - its all about Stance!

Obviously im new to this scene so some advise would be welcome on the ride setup thanks!

FSB, RSB
Podi or glowshift Gauges
New halo and projector retrofit headlights
Built donor engine
- hybrid (1mz top + 3mz bottom)
- pistons etc
- cams
- etc
- dry-shot
SUPERCHARGER! ... i wish.... havnt decided yet
standalone ecu (this'll be a challenge... its a build it your self kits lol)
some new paint would be nice! (coming soon)
and many more things

will post a pic of what it should all look like when its done! gotta finish the photoshopping first!

Then i have my sister's 95 civic 3 door (bought for 2300$)

has a B15? od D15 i cant remember, im pretty sure i convinced her on going halfers on a decent turbo setup!
Her wheel bearings need to be replaced in the back and hopefully the struts soon.

Note: she always comes to me for help when ever something is wrong, so i can sell her on some complete BS if i want cause her BF doesnt know any better either lol.

so ive sold her on getting coilovers when her struts give. car has 285K/Kms on stockers

bought her 15" white multie spoke with brushed face rims last year for her bday! running 205/40

someone tapped her bumper at her work and paint is chipping so now when summer comes round where getting her a new COOLER and LOWER front bumper and well keep the stock one for winter.

only because its cheaper to buy a new one and paint it then get a shop to strip the old one and repaint it

just installed in her car
Clarion mono
kicker in box (prefab)
infinity kappa 6.5's all round
sony deck (she got it off her bf for 40$ brand new in box)

Now for the fun one!

My friends 1986 BUICK REGAL (bought for 1700$)

him and i are doing this build, kinda in a dumb way though, id rather strip it but he wants to drive it some times. and we dont really have a shop since we still live at home.

So we recently installed hooker long tube headers onto the 305
car has iroc-z rims painted to match the car

TO COME

brand new interior
G seats
headliner everything all in white leather with teal pipping and stitching (exterior colour is Teal)
350 engine or bigger?
built with nos, stroker, and maybe a supercharger
edelbrock full suspension kit 52005
manual tranny or race tranny

body work
some paint touch ups
new dash and gauges, most of his dont work lol

will post pics of some of the stuff above!
comments and advice welcome!

[Stringbean]

These are my sisters rims i bought her



Tylers headers



[ame="http://www.youtube.com/watch?v=2ykJvk0NC3U"]YouTube - 305 hooker headers[/ame]

[birdy]

Don't take this the wrong way but... What the fuck are you on?

[Stringbean]

Don't take this the wrong way but... What the fuck are you on?

for what part?! and im on the strong stuff clearly!

[speedpunk]

Whats wheels are those?

[Stringbean]

Whats wheels are those?

not sure, i forget, and i cant look at them cause there in storage for winter, but i got them from a tire shop that was closing down, 50$ a wheel, everything HAD to go THAT DAY type of sale, they where reg 300$ a wheel.

[Jersh]

only 18x8? i'm not the resident wheel expert here, but i'm pretty sure you're gonna need something wider than that and low offset if you're expecting "stretch, poke, and roll."

other than that, not much else to say. it seems like you have everything pretty well planned out, good luck with the build, it looks like it'll be an interesting one.

[Stringbean]

only 18x8? i'm not the resident wheel expert here, but i'm pretty sure you're gonna need something wider than that and low offset if you're expecting "stretch, poke, and roll."

I agree! im not 100% sold on the MB Boost wheels and unfortunatly the biggest they come in is 18X8. I also decided on these before discovering StanceWorks, so im more then likely gonna change them up!

any suggestions? it just needs to be 114.3X5. also i thought 18's are a nice size, i really wish they made a 18X8.5 or 9, but if needed il do spacers all around to make the Stance nice and clean, it still has to be track functional for me. Once i get a Z ill bag er and stance er up nicely!

[sixty-nine-dime]

dude, cool pics or die!!

[Stringbean]

working on getting some better pics, im not great at photography so i dont have many pics of any of the biulds!

[Stringbean]

Pics added



This is what i am working towards had a friend on another forum photoshop it all up for me!

[Chase Otter(:]

If you squint RREEAALL hard, it kinda looks like a Supra... but only kinda.
Needs more lowwz

[Stringbean]

If you squint RREEAALL hard, it kinda looks like a Supra... but only kinda.
Needs more lowwz

Agreed! a forum member on SolaraGuy photoshopped it for me, i forgot to ask him to lower it and tint the tails, but oh well its a good guide to start with! I'M IN LOVE WITH IT!

[brownishwater]

This thread is going places, I'm just not sure where.

[Chase Otter(:]

This thread is going places, I'm just not sure where.

*whispers* none of us doooo.