) )
Announcement
Collapse
No announcement yet.
PRO-STAR's e36-build
Collapse
X
-
i like it! but looks weird without any camber...even with stock arms and no camber plates u can still run -3 in camber on the back and add some shims on the front(Ghetto camber
) )
-
Exactly what im doin, runnin rears with adapters and redrill front, but im doin a hub redrill and not a wheel redrill.
cant you kick in a bit more camber?
Leave a comment:
-
correct the rears a fitted with adapters as of the front well i did try out the adapter's and it gave me hella poke...which i didnt like so i had them re-drilled then i did this and all worked out

THANKS to OKIN.
hope that clears it upOriginally posted by Okin View PostMe thinks you have to do some things with them lights too.... HmmmmKay.
Seems a bit crooked.
I had a similar scenario fitting my wheels. All 4 corners had to be rolled and pulled, and then I decided to loosen up the bolts where the fender, filler and cover meet and pull them out/align and tighten. Bought myself about another inch of clearance up front.
Leave a comment:
-
Something I don't understand.
You said your wheels are RS308 & RS309, which means they're 8x17 ET7 and 9x17 ET25 with 5x114,3. You also stated you're running adapters.
Even assuming your adapters were only 15mm thick, which would put you at an ET-8 for the front, the wheels would have to stick out way more than that.
What am I missing here?
Leave a comment:
-
-
looks awesome!! looove the colour, LB3Y colorado red. is this a BMW factory colour?
Leave a comment:








Leave a comment: