Tweet
Hello everyone.
My name is Henrik and I'm 19 years old. Currently in high scool, but going to be electrician apprentice this summer.
I've had a 2003 Audi A4 B6 1.9TDI Quattro S-line, and a 2001 Audi A3 1.8TQ. Both had high mileage and I only owned them for a short time. About 6 months each.
Had coilovers on my A3, but never stanced it much. After a while, I discovered the whole stance scene and found out that's what I want to do. I therefore sold my 1.8TQ, and bought the one car I've always wanted - an MK4 Golf. I chose to go with diesel because of extremely high gas prices in Norway. (2,5usd/liter for gas and 2usd/liter for diesel). Found myself this 101whp 1.9TDI Pacific. And of course the 3-door. The only car in Norway with Pacific package. It's imported from Germany. This had 134k km on the clock when I bought it and it's my daily driver.
Had coilovers installed when I bought it, and a set of BBS RS Reps. 17x8.
Sold them fairly quick as I wanted something wider.
So I went for Zito WP111 (also known as Miro 111). 18x9,5 ET35. Had to go 15mm spacer all the way to be clear from coilovers.
These were a bit boring and too mainstream in Norway, so I sold these aswell. Went looking for something I haven't seen in Norway. And staggered.
Recently bought these new. Brock B2 18x8,5 ET13 in the front and 18x10 ET30 in the back. Waiting for tires atm, I'll be running 225/40 all the way. Bought cheap tires, so will probably change them fairly quick.
Here's an example.
Car is sitting on it's awful winter rims. Borbets 16x7,5. Going to get more lows in a couple of days. Already having trouble on the awful roads of Norway, but I don't care.
Will probably make a build thread after I start as an apprentice and start detailing this car alot and have a lot of content to update with.
My name is Henrik and I'm 19 years old. Currently in high scool, but going to be electrician apprentice this summer.
I've had a 2003 Audi A4 B6 1.9TDI Quattro S-line, and a 2001 Audi A3 1.8TQ. Both had high mileage and I only owned them for a short time. About 6 months each.
Had coilovers on my A3, but never stanced it much. After a while, I discovered the whole stance scene and found out that's what I want to do. I therefore sold my 1.8TQ, and bought the one car I've always wanted - an MK4 Golf. I chose to go with diesel because of extremely high gas prices in Norway. (2,5usd/liter for gas and 2usd/liter for diesel). Found myself this 101whp 1.9TDI Pacific. And of course the 3-door. The only car in Norway with Pacific package. It's imported from Germany. This had 134k km on the clock when I bought it and it's my daily driver.
Had coilovers installed when I bought it, and a set of BBS RS Reps. 17x8.
Sold them fairly quick as I wanted something wider.
So I went for Zito WP111 (also known as Miro 111). 18x9,5 ET35. Had to go 15mm spacer all the way to be clear from coilovers.
These were a bit boring and too mainstream in Norway, so I sold these aswell. Went looking for something I haven't seen in Norway. And staggered.
Recently bought these new. Brock B2 18x8,5 ET13 in the front and 18x10 ET30 in the back. Waiting for tires atm, I'll be running 225/40 all the way. Bought cheap tires, so will probably change them fairly quick.
Here's an example.
Car is sitting on it's awful winter rims. Borbets 16x7,5. Going to get more lows in a couple of days. Already having trouble on the awful roads of Norway, but I don't care.
Will probably make a build thread after I start as an apprentice and start detailing this car alot and have a lot of content to update with.
Comment