New to the S/W forums have a Camber Q

[TonyToxic JDM]

What can I do to get more than -5 camber? I Want the rear to look like that red EG that was huge on this thread awhile back, but thats like -10 What do I need to mod on my camber kit to push more then -5 I have -2.5 camber stock from dropping it on coils, will the -5 camber add on to the 2.5? Any help would be very very helpful.

[244Brick]

Welcome to S|W what wheels specs are you trying to run for that amount of camber needed?

[TonyToxic JDM]

Im running 195/45/15 with 15x8 Diamond Racing rims. I want to get at least as much as that Red eg that was running around on these forums a while back. I couldn't find his build, but either way, I would love to know what needs to be modified to achieve said much camber. As I've seen, -5 doesn't really stand out much (at least in my mind) Any help would be great.

[TonyToxic JDM]

I'm running FormvFunction V3 coilovers, and droped about 3 inches or so

[crxmarc]

http://www.stanceworks.com/forums/showthread.php?t=28588

this is who your looking for
or check here

http://cdn.stanceworks.com/forums/showthread.php?t=19798

Read his whole thread from start to finish, you may learn a lot. Also theres a purple eg on here with some pretty cool fitment and lots of stuff about how he did it. user name is PSU

[TonyToxic JDM]

Thanks man!

[244Brick]

Yea, you won't need that much camber if you aren't running negative offsets on 15x8

[TonyToxic JDM]

I just want it stanced out lol. I mean, I'm probably running -1.5 in front and back atm. But, how do those demon camber guys do that? Plus, I heard you don't need to buy front cambers to make adjust them, no? Can you adjust or get more camber out of a stock front camber? (never had to work on a car's camber before, so this is new to me)

[244Brick]

I'm not sure your if you and I have the same understanding of "STANCE." What's your goal? Demon camber, flush, hellaflush, poke?

WEll IDK much about the civic suspension, but you can use adjustable ball joint's; although those will probably raise the UCA and when you go low you'll have to cut the towers. For the CB7 chassis we could use EF UCA and it would give use about -7 camber. So, if your just cambering to camber then you might need to reconsider and figure out what you want!

edit:

this is not "stanced"


Good Example:

[TonyToxic JDM]

I'm looking for camber similar to that tanish yellow eg. I already have a street car, as this would be my show car

[244Brick]

Yeah you can do it! Do you have wheels already? cause if not all these question is irrelevant if you don't know what specs you want to run

[TonyToxic JDM]

I'm already running 15x8s all around with 195/45/15s on all fours.

[jasonklee]

Pics of your car?

Welcome to StanceWorks

[milano_red]

Yea I would like to see your car also.

Welcome buddy, you can learn a lot here...

[TonyToxic JDM]

How do I post them up?