Lowerin a isuzu

[Riddinlow94]

Wut is the cheapist and easyiest way to lower a truck without having to use bags.

[LethalEthan]

loosen up the torsion bars and use blocks out back. You can also take a few of the leaf springs out

[cereal black]

Depends on what kind of truck you have. Lowering springs, or like said above...

[tunnelvision]

axle flip in the rear. i have an old ford f100 they make drop eye beams for those. I also haveo blocks between axleand leaf

[hondarida5]

i GUESS DO SOME CUTTING IF LETHALETHAN IDEA DONT LOWER IT ENOUGH FOR YOU.

[SD202]

remove the springs.

[LethalEthan]

isuzu's are all torsion bar trucks as far as I know. The axle is also on the top of the leaf springs stock. You'll need longer u-bolts and some blocks. You can get pretty low without cutting anything as the isuzu's have lots of room in the fenders. You'll hit the control arms on the crossmember before you have to cut anything.

This was mine with 3in blocks and a leaf removed


make sure you get some drop shocks too or you'll break the eyelets off, ask me how i know hahahaha. Toxic shocks are the best for going super low.