Pug 307

[Project307]

Hi stancers, I thought, I"m new here, so why not introducing myself here. My name is "Jan" and I come from Belgium. It's always interesting to watch threads on this forum because you can learn a lot from here!

I'm driving a Peugeot 307, lowered on Weitec coilovers and rollin' on RH zw1 8x17 & 8,5x17.

Here some pictures:

Shot at 2011-05-17

Shot at 2011-05-17

Today the stickerbomb is already removed.
Next up will be the wheels, I'm going for 8,5J in the front and 9,5J in the back and golden wheel bolts.

Hope you like it.

Greetz

[daniel_lucian]

Always liked your 307. I followed your thread on Tuned-Belgium.com although I was translating your posts with Google translate which was not always very helpful ).

I also own a 307 and I was wondering if you can tell me how you went so low in the front. Mine is lowered on V-Maxx's which (if I remember right) go lower than Weitec's. I have my front coils all the way down and you're still about 3 cm lower than me

P.S: you should post more pics

[Project307]

Thx man! Well I also heard that V-Maxx's goes lower than Weitec's. As on the pictures, in the front I have stil 1cm left to drop! In the back, the Weitec springs were way too big so I bought shorter springs at a local suspension shop, don't ask what brand they are because I don't know, the only thing I know is that they're blue, smaller and shorter than the Weitec's. The guy from the local shop told me that these spring are used on the track..

Greetz

[daniel_lucian]

Thanks. Will see in the spring how can I make the front go lower.

Good luck with the future plans! Subscribed to the thread

[Project307]

No problem It must go lower! But maybe there are helpsprings on your coils? Than you'd better remove these, I think you can lay the front on mother earth then

Do you have a thread here on the forum or on Tuned-Belgium?

Greetz

[daniel_lucian]

They have helper springs but not like other coils I've seen, mine's are as long as the actual springs (it looks like there are two springs of the same length). I was thinking to buy just the helper springs from other coils producer and switch them with mine's. I'll check better tomorrow when I'll put my winter wheels on.

Don't have a thread here or on Tuned-Belgium. I don't consider my car StanceWorks worthy yet but maybe I'll open a thread here in the Intro section.

[Project307]

Well then, maybe you can just remove one of the springs? However, you will find a solution

Oh you have to begin somewhere, mine is not so special too, just lowered and rims

Greetz

[jasonklee]

Ew to the stickerbombed rear but that's about it.

Welcome to StanceWorks

[POMAH]

Wish we could have some things here that you European guys get to enjoy

[Project307]

And we wish we could have some things here that you American guys get to enjoy

French cars are not the best there is, trust me, I already had a lot of technical problems with it

[Project307]

Ew to the stickerbombed rear but that's about it.

Welcome to StanceWorks

Stickerbomb is gone since a few months

A few updates:
Steenless steel door sills (example)

http://seddes.nl/vj3/nl//products/962375.jpg

Gold-plated wheel bolts (example)

http://img4.imageshack.us/img4/9064/pc030096.jpg

Gold-plated valves (example)

Shot at 2011-12-16

And new rings for the RH rims, so the new setup will be 8,5 in the front with 195/40/17 tires and 9,5 in the back with 205/40/17 tires.

Shot at 2012-01-31

Shot at 2012-01-31

[P78]

told u to get bigger lips (or didn't i?)

[Project307]

told u to get bigger lips (or didn't i?)

You mean bigger than these? It's wide enough now for me

[daniel_lucian]

This will look awesome with the widened wheels!

[electricalbox]

New lips look beautiful, can't wait to see them mounted.