Whats up guys, Figured there was no better time then the present to start my build thread.
My names Noah and a drive a 1995 Nissan Hardbody!
So before the truck was mine, Both of my brothers have owned this truck. Its been in the family for about 6 years or so. Neither of them did much to the car besides pathfinder seats. So ive had dreams of working on this truck forever haha. Then my brother who owned it second did this one day.
Then not to long after I bought it because my cb7 died on me. Within the first week of owning it I took the bumper off, because it was straight and bothered me. I also cranked the torsion bars down and threw 3 in blocks in the rear.
Next on the list was a roll pan and a crab haha.
Then it was time for some new tires, because ive slid the old ones to many times
When it was my second brothers truck, he bought some ar23s for it so I threw them on.
I made a slightly better intake over the stock one and also made a new front lip.
SORRY IN ADVANCE THAT I HAVE A TON OF INSTAGRAM FILTERS lol
Made a speaker box to go behind the seats.
Was really getting sick of the 17 shades of black the truck has acquired. So I painted the front, or should i say rolled
It actually came out fairly good, so I was happy. Also threw my fender flares on the rear to cover up that mexiflush look haha.
I threw my bumper on with a new lip that I got at my local parts yard, and made it fit.
Then I made some sideskirts off a saab fit haha, along with my front flares.
Took the bumper off to paint it and tinted my headlights.
Back together and washed for USF meet, and a rolling shot there.
And at the meet.
Close up of the roll pan if you were wondering what is on it haha
Then I purchased this beauty.
Then not to long later timing jumped, so it was time to start a long rebuild with upgrades, and MOAR LOW!
Starting shaving my valve cover for a sleeker look and tore the engine apart.
So since the new rear end is wider I needed to make wider fenders. But ive never seen a 4x4 bed in good condition so I made over fender!
Cut out the old inner fender so I can go lower also.
Pathfinder front fenders, just cut down.
Since the truck isnt currently running, I took the leaf springs off and set the truck down on the frame to see how it will sit. And the result is mathematical!
I still have a inch or 2 that I can go down before rubbing the new fenders.
Thats all I have for right now. Let me know what you think.
My names Noah and a drive a 1995 Nissan Hardbody!
So before the truck was mine, Both of my brothers have owned this truck. Its been in the family for about 6 years or so. Neither of them did much to the car besides pathfinder seats. So ive had dreams of working on this truck forever haha. Then my brother who owned it second did this one day.
Then not to long after I bought it because my cb7 died on me. Within the first week of owning it I took the bumper off, because it was straight and bothered me. I also cranked the torsion bars down and threw 3 in blocks in the rear.
Next on the list was a roll pan and a crab haha.
Then it was time for some new tires, because ive slid the old ones to many times
When it was my second brothers truck, he bought some ar23s for it so I threw them on.
I made a slightly better intake over the stock one and also made a new front lip.
SORRY IN ADVANCE THAT I HAVE A TON OF INSTAGRAM FILTERS lol
Made a speaker box to go behind the seats.
Was really getting sick of the 17 shades of black the truck has acquired. So I painted the front, or should i say rolled
It actually came out fairly good, so I was happy. Also threw my fender flares on the rear to cover up that mexiflush look haha.
I threw my bumper on with a new lip that I got at my local parts yard, and made it fit.
Then I made some sideskirts off a saab fit haha, along with my front flares.
Took the bumper off to paint it and tinted my headlights.
Back together and washed for USF meet, and a rolling shot there.
And at the meet.
Close up of the roll pan if you were wondering what is on it haha
Then I purchased this beauty.
Then not to long later timing jumped, so it was time to start a long rebuild with upgrades, and MOAR LOW!
Starting shaving my valve cover for a sleeker look and tore the engine apart.
So since the new rear end is wider I needed to make wider fenders. But ive never seen a 4x4 bed in good condition so I made over fender!
Cut out the old inner fender so I can go lower also.
Pathfinder front fenders, just cut down.
Since the truck isnt currently running, I took the leaf springs off and set the truck down on the frame to see how it will sit. And the result is mathematical!
I still have a inch or 2 that I can go down before rubbing the new fenders.
Thats all I have for right now. Let me know what you think.
Comment