I was wondering what some of you stance guys do about taking care of the inside of your fenders after removing the liners? I have done some searching on here and nasioc and did not find much. Most people seem to be secretive about "specs" and "fender work", when I just want to not totally ruin my car.
I have a 14 STI lowered on coilovers, with an 18X10 wheel, 245,40 tire, and a 20mm spacer in the front. Its pretty aggressive in the front, so I removed the entire front half of the fender liners, for the front of the car. Rear is fine. My concerns are ruining the wiring to my headlights, foglights, horns etc. and now that the liner is removed, my washer fluid tank is exposed. Not really sure what people do about this, ill take any kind of input on this topic!
I can take pictures of what it looks like if you guys want a visual representation.
Im not sure if this is the correct thread to post this in, seemed like a good spot though.
Thanks!
I have a 14 STI lowered on coilovers, with an 18X10 wheel, 245,40 tire, and a 20mm spacer in the front. Its pretty aggressive in the front, so I removed the entire front half of the fender liners, for the front of the car. Rear is fine. My concerns are ruining the wiring to my headlights, foglights, horns etc. and now that the liner is removed, my washer fluid tank is exposed. Not really sure what people do about this, ill take any kind of input on this topic!
I can take pictures of what it looks like if you guys want a visual representation.
Im not sure if this is the correct thread to post this in, seemed like a good spot though.
Thanks!
Comment