1991 Austin Mini

[DouD]

Hi guys, long time without updates.

First, I edited the 1st post because all the pictures were gone, I put some with Flickr, hope these one will stay.

The last time the Mini had been checked, the controller found some important rust so I decided to replace the floor.

Here is the rust I found :

IMG_20181101_144805 by Cyril, sur Flickr

IMG_20181101_144759 by Cyril, sur Flickr

So I decided to cut everything :

IMG_20200229_145647 by Cyril, sur Flickr

And here is one side nearly ready to be welded :

IMG_20191130_173307 by Cyril, sur Flickr

And this picture is from the speedometer I'm putting in, everything is now working and plugged, I just need to finish the floor to have fun with it !

80464420170226172651 by Cyril, sur Flickr

[hinrichs]

Nice work so far, glad to see you still have this. Sucks about the rust but seems you have it all sorted.

[DouD]

Hi guys, some news on the Mini, first, I finished to cut the driver side and put it in place :

1 by Cyril, sur Flickr

Then, the last piece I needed to do was for the hole I had in the corner of each side :

2 by Cyril, sur Flickr

Cardboard template :

3 by Cyril, sur Flickr

Driver side is done :

4 by Cyril, sur Flickr

The passenger' side hole :

5 by Cyril, sur Flickr

Cardboard template too :

6 by Cyril, sur Flickr

The finished part :

7 by Cyril, sur Flickr

And a view with both of the floor panel in place. The copper color is some special paint to put before welding, I need to put it on every parts

8 by Cyril, sur Flickr