Page 2 of 12 FirstFirst 1234 ... LastLast
Results 26 to 50 of 285

Thread: 100mm 1/11 Car Register.

  1. #26

    Default

    Quote Originally Posted by Oxer View Post
    So after a bit of thinking and some discussions with Tranz and a couple other people, I feel like we need some form of screening process for the cars that are entering under the Stanceworks banner. I have had a discussion with Robin and have worked out we have roughly 20 spots, give or take, for us as a colaborative group with House of Stance. That number may be pushed to 25 IF we work out which cars are actually entering.

    Back in 2012 we drove interstate for the first Showcased, where we similarly colaborated with House of Stance, without really knowing it. Both Ray and Tony entered with us, and Chook was right across the road, where we took out the #1 car club trophy, and Chook took out best stance. That was a killer weekend, there were many good memories made and friendships formed. We also showed up with some of the best (in my own opinion) fitted cars at the time.

    Fast forward to now. In the current "scene" there are many people and "crews" that are trying to pull off the fitted look that we all love. Some of them are actually doing a fantastic job of it and here lies my thinking that at 100mm, since we are colaborating with HoS, we have to bring 100% to the show. There really isnt any room for any wheel gap, or lack of offset. If the wheels are tucking, the rails have to be touching. If the wheels are poking, there needs to be adequate camber dialed in for that jaw dropping look.

    Ill give you an example.


    As cool as the civic was at this point in its life, Turbocharged, bagged, fun, it never recieved as much attention as it did when it looked like this:



    As good as this looks, It doesn't jump out anywhere near as much as the LM's.


    So basically, there is going to be some criteria that you will need to meet to enter as a part of out colaboration. I understand that people are building their cars for this and not everything is there yet, so pictures cant be supplied. At the same time if people are trying to get their cars ready, but dont hold the same vision as what we need, then there shouldnt be a real rush on getting parts if it isnt going to make the cut. If you're reading any of this and thinking "Ox and SW can go fuck themselves" then have a cup of cement, harden the fuck up, make like a tree and leave.


    Post up a picture of your car currently, and what it is that you are buying/planning/doing to it to make the cut. As you progress, Update us in here. Some cars are already close to being ready. As the visions become realities a list will be formed untill we have filled our spaces.

    This thread is purely for the SW cars entering, as HoS have the same high expectations and all cars that come under their banner will meet said expectations.
    Oxer,

    Totally agree with you, if our cars don't meet the requirement they won't be entered that even goes for my own personal car.

    Ray has brought up the screening process and if we don't measure up to the bar, to be honest there is no point in entering something that is half done or close to 'stance' genre.

    We'll be carrying out our own culling process also as we need to reflect what we're all about.

    Cheers,
    Mike

  2. #27
    Join Date
    Jul 2010
    Location
    Melbourne, Aus
    Posts
    1,474

    Default

    im gonna just come and spectate and enjoy the day with the boys... got alot going on atm and not 100%.


  3. #28
    Join Date
    Apr 2013
    Location
    Melbourne
    Posts
    577

    Default

    rear bar and sideskirts are freshly sprayed from ol' mate dundas panels.

    Going to put a fresh coat of red tint on the tails and rear reflectors as well as mount up the rear diffuser then I'll try post up some pics in the next few days





    Pana's are also currently underway @ wheel solutions getting full gutter repair & polish treatment as well as centres painted a bit of a unique color
    Like a glove

  4. #29
    Join Date
    Jun 2011
    Location
    Melbourne
    Posts
    555

    Default

    your paint guys any good bro?

  5. #30
    Join Date
    Apr 2013
    Location
    Melbourne
    Posts
    577

    Default

    Dundas panels? Its the first time I've used them but after being recommended them by anth and tranz I decided to go with them...the bloke who runs the joint is honest and old school + did cheaper for cash.

    Job was done professionally and exactly how I wanted it plus the turn around time was fast so I think they're good.
    Like a glove

  6. #31
    Join Date
    Aug 2009
    Location
    MEL Australia
    Posts
    23,230

    Default

    Another point i probably didn't make, which some people assumed anyway, is since this is a public forum you're more then welcome to sms me photos etc direct insread of posting pics up in here.

    If you dont have my mobile number then are you really stanceworks material?
    Quote Originally Posted by anth View Post
    Lucky they didn't come into your house and disrespect your whole family.

  7. #32
    Join Date
    Dec 2013
    Posts
    969

    Default

    i'll mms you more photos of bog chipping off my guards and me sticking them back on with sikaflex

  8. #33

    Default

    Prob wasn't going to make the cut.
    But on the off chance I was, count me out.
    Bora got some loving by a small 4x4 last night
    Money getting it up to scratch will now be used to fix the scratches
    Sarcasm is easily calculated on vortex dude. Take 4 parts GLI lip and divide by BBS RS. If you are left with a remainder, subtract it from omgmoarlow. Profit.

  9. #34
    Join Date
    Aug 2010
    Location
    Melbourne, Australia
    Posts
    1,698

    Default

    Quote Originally Posted by dylan8 View Post
    Prob wasn't going to make the cut.
    But on the off chance I was, count me out.
    Bora got some loving by a small 4x4 last night
    Money getting it up to scratch will now be used to fix the scratches
    damn man...
    Quote Originally Posted by TRaNz View Post
    omg man...naaaaahhhhhh...dafuq bro...nah thats crossing the line. youre fucked bengfacebengcunt.

  10. #35
    Join Date
    Feb 2010
    Location
    Melbourne - Australia
    Posts
    4,580

    Default

    Gawdammit Dylan...........sighhh.....
    fb IM`ed
    S I N G L E | W O R K S - Loneliness is a Lifestyle

  11. #36
    Join Date
    Jan 2012
    Location
    Los Angeles
    Posts
    5,818

    Default

    That is shit to hear Dylan, hope it isn't too expensive to fix her up.
    IG: @sebastienaudeon
    1974 Porsche 911S

    Quote Originally Posted by TRaNz View Post
    *pats Sebs head*
    there there.
    keep calm, go mash your face on a car window.

  12. #37
    Join Date
    Dec 2013
    Posts
    969

    Default

    poor go dylan
    hope it gets sorted

  13. #38
    Join Date
    Dec 2011
    Location
    Victoria, Australia
    Posts
    933

    Default

    Looking like i'll be spectating as well. So much body/paint work is needed on the E36 before November.
    - = [ M . I . A | c r e w ] = -

  14. #39

    Default

    shouldn't be too bad,
    new bumper, new tail (genuine GLI i imported when the $ good) new boot (had just painted). havent looked if there is any damage to the chassis, dont really want to know.
    just frustrating when the driver did a runner
    Sarcasm is easily calculated on vortex dude. Take 4 parts GLI lip and divide by BBS RS. If you are left with a remainder, subtract it from omgmoarlow. Profit.

  15. #40
    Join Date
    Feb 2010
    Location
    Melbourne - Australia
    Posts
    4,580

    Default

    Quote Originally Posted by dylan8 View Post
    shouldn't be too bad,
    new bumper, new tail (genuine GLI i imported when the $ good) new boot (had just painted). havent looked if there is any damage to the chassis, dont really want to know.
    just frustrating when the driver did a runner
    mmmmm so is this a maybbeeeeeeeeeeeeeee
    S I N G L E | W O R K S - Loneliness is a Lifestyle

  16. #41
    Join Date
    Feb 2012
    Location
    Canbrah, Australia
    Posts
    990

    Default

    Not gonna push for my car to be entered. front bumper needs a respray and a few dents need pulling out so would rather it go to someone with a mint car.
    Quote Originally Posted by TRaNz View Post
    We ride homos together, we die homos together. Homos 4 Lyfe. <3

  17. #42
    Join Date
    Apr 2014
    Location
    Canberra, Australia
    Posts
    26

    Default

    nek minit stanceworks has zero cars attending

  18. #43
    Join Date
    Feb 2010
    Location
    Melbourne - Australia
    Posts
    4,580

    Default

    Foff, you have been msged.

    Linc, thanks for your invalid input.
    S I N G L E | W O R K S - Loneliness is a Lifestyle

  19. #44
    Join Date
    Apr 2013
    Location
    Melbourne
    Posts
    577

    Default

    wheels will be back from the shop assembled and painted tomorrow if all goes well
    Like a glove

  20. #45
    Join Date
    Jun 2011
    Location
    Melbourne
    Posts
    555

    Default

    nek minute only dans car is ready.

  21. #46
    Join Date
    Oct 2010
    Location
    SE melbs
    Posts
    488

    Default

    Getting wheels back with tyres today. Mint mate.
    [QUOTE=Oxer;1593769]I Love VW's[/QUOTE]

  22. #47
    Join Date
    Dec 2013
    Location
    Melbourne, Aus
    Posts
    74

    Default

    The cabby is drive able as of last tuesday from its 3 month long operation! Yay!

    Getting a full buff cut and polish from its new paint job then on to installing all the goodies I've bought along with rebuilding the rs to suit the new paint job. Excited is an under statement

  23. #48
    Join Date
    Jun 2011
    Location
    Melbourne
    Posts
    555

    Default

    fuck yeah..

    cars currently at the body shop under going its bumper shave. popped into see it today. looking fucking sick

  24. #49
    Join Date
    Sep 2009
    Location
    Queensland, australia
    Posts
    1,353

    Default

    looks like im out, ill hopefully have my car back from panel shop before the day, but theres so many other things i need to do to it, i just wont have time.

  25. #50
    Join Date
    Aug 2010
    Location
    Melbourne, Australia
    Posts
    1,698

    Default

    Wheels getting here next week. Front shocks maybe tomorrow, if not early next week. Spacers porbably maybe next week.

    Engine bay as done as its going to get for now.

    Interior done. Exterior needs a good detail.

    Air setup done, just waiting on shocks befor i can pressurise. Hopefully no leaks.

    Well on track, for now.
    Quote Originally Posted by TRaNz View Post
    omg man...naaaaahhhhhh...dafuq bro...nah thats crossing the line. youre fucked bengfacebengcunt.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •