1987 Nissan Sentra 4wd wagon....

[TOOQIKK]

Well new here...just wanted to say hi!
the wagon started off with oem 4wd struts and springs..im in the process of swappin in tein coilovers from a gti-r(they were on my other toy project ...a n13 awd-t pulsar...thats for another time and thread...)...swapped out the front shackles with some b13 se-r units, and nx2k calipers and rotors(also have altima M/C and nx2k booster in) waitin for the adapter brackets to do a rear disc conversion using maxima calipers and jdm nx2k rotors(they are big!) .....once the suspension is in I will be dailing it down low low low.....will be running b14 rims with 205/50/15s for the summer/dry weather and some sort of winter tires like blizztaks or something on an extra set of b1 rims have chillin in the garage....

the lil bugger has a stock e16i motor with only 20,000 miles on it!!!!!working on gettin a custom ground Isky Cam and a header for it along with a custom 2.5" exhaust....
the build thread is here.....
build thread
here is how she looked when i got her....


rear coilover vs oem 4wd assembly


front set up minus the wheel....lol

only shot i could find of the tires no make that a tire...lol...will try and get one of full shut from the side....i dont have the rear b14 rims on it yet....was waiting until i did the brake upgrade.....

dont mind the half started repair on the door it was just to stop the rain and elements from doin any more damage the hole is so big i could put my fist through it!
i know its alot of work on an older car but i love my nissans!

[jasonklee]

This will be interesting

Welcome to StanceWorks

[xBtony]

^ x2 on that. lol. welcome!

[Bracknaphobia]

So much work....I'm thoroughly excited to see what goes down with this

Welcome

[hinrichs]

could look good in the end, cant wait to see what happens to this

[TOOQIKK]

can barely fit my hand flat under the fender....need to roll it and drop just a litte further...

full shot of the passenger side with b14 rims and coil overs....need to adjust the front to make for a better stance.....


check out the the build thread link in my first post....alot more pictures

[schroedin]

Looks interesting. Welcome.

[sixonefive]

yep. interesting is the right word. good luck man, welcome to stanceworks

[TOOQIKK]

got a couple little projects started yesterday...




got the three wiper blades painted the GM Dark Blue Metallic
layed some clear coat on them today.....

i know she is not of the "normal" cars to work on but that is what i like the odd ones the ones you dont see coming only their tail lights as they pass you and leave you with that look like WTF was that and did it really just pass me?!....hehe

[TOOQIKK]

got my upper intake manifold back from being welded up...had several holes filled after i had removed all the extra mounting points for the TMIC ...as i will be running a FMIC after i get the little beasty rebuilt.
the whole motor is gonna be painted cast aluminum, plan is to use all black silicone vacuum lines, and black braided s/s lines for the motor and the engine bay will be painted cast aluminum too and all the brackets will be the GM Dark Blue Metallic...should look pretty good once its all done but that is a ways done the road as i still have to contend with the cancer fight, have to get a new steering rack for it...finish the body work, and get the interior back in it....and redo the gauges(i **** green!!! and the old skool gauges use the colored plastic so you cant just upgrade to colored LEDS like i did in my 07 MC)
and make a custom 2.5" exhaust for it along with a custom Isky Cam install, and a locate a header for it......pacesetter is the only company that made them and only made a limit amount and havent made them in years so that one should be fun!

[H Bliss]

shes got serious potential man,

Welcome Aboard

[Anonymoose]

Hey wicked progress just read the build thread! What fabric paint stuff did you use on the seats? Does it come off at all, what is it a spray?

[Jay Z.]

welcome.

[TOOQIKK]

Hey wicked progress just read the build thread! What fabric paint stuff did you use on the seats? Does it come off at all, what is it a spray?

hey thanks!
its a spray dye for vinyl and fabric...ill get the name of it for yah....and post up tomorrow....
i have used in the past with good results and the color doesnt rub off on the seats....I plan on puttin some seat covers on all the seats any way...lol...i got a golden retriever that loves to ride in the car and go hiking and play at the local dog park...so i gotta protect them any way...