After much fannying around I finally pulled my finger out and finished my custom centre cap design, ordered some new wheel bolts, locking bolts, stainless tyre valves and most importantly, some undersized rubber bands.
Although the wheels are on, the stance remains in progress due to the underlying:-
The rear tyres were catching under load - a friend of mine rolled the arch lips today so this should be fixed!
The front wheels foul the coilover strut, I need some 3mm hubcentric spacers, fast! Until then the car will have to live sitting high on the front, as per below!
Once I've got a pair of spacers, I'll be dropping the front approx. 20mm to see how it looks/rides...
Although the wheels are on, the stance remains in progress due to the underlying:-
The rear tyres were catching under load - a friend of mine rolled the arch lips today so this should be fixed!
The front wheels foul the coilover strut, I need some 3mm hubcentric spacers, fast! Until then the car will have to live sitting high on the front, as per below!
Once I've got a pair of spacers, I'll be dropping the front approx. 20mm to see how it looks/rides...
Comment