Announcement

Collapse
No announcement yet.

Nissan Thai-Thai

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello guys, it's Friday night here now. This is live from Thailand haha

    Yesterday my front wheel just arrived. It's SSR Angle 5x112 R18 front 8" and rear 10".
    I will use only 10" to be my front wheels.
    image

    First removing the tires.

    image

    image

    image

    And test fit first haha

    image

    From testing fit my plan would not miss.
    You may have a question, Why I have to swap the windows in different brand?
    The answer is BUDGET!
    The first set BBS LM, it's junk wheel I got it in very cheap, I combine 4 wheels to 2 wheels 14". So I left center windows for 2 to be front.
    I try to find the cheap BBS LM 2 wheel to be my front but the requirement is 10"-11"
    So that the price will be high.
    I searching the wheel data from internet and these SSR just on sale at Yahoo.japan.
    I try to find the back side of SSR Angle and estimate just eyes and it should be fit with LM thought.
    So I got these set about 570$ include shipping.

    And tonight is Friday I started my experiment as this video

    [/quote]

    Enjoy Guys Cheers!
    https://www.instagram.com/phet_fresh/

    Comment


    • this is gonna be some badass lip
      Ruining cars since 2006 yo

      Comment


      • At first I was like "He's doing it wrong..." and then I was like:

        Comment


        • ok so I've just read the whole thread I think my face melted. Your fab skills are dude. Yes. Is it your line of work or something? Machinist?
          Ruining cars since 2006 yo

          Comment


          • Originally posted by Meeve View Post
            this is gonna be some badass lip
            Originally posted by Meeve View Post
            ok so I've just read the whole thread I think my face melted. Your fab skills are dude. Yes. Is it your line of work or something? Machinist?

            Thank man, I'm mechanic, just mechanic learning from internet not engineer!





            [quote=DUTCHswift;1471831]At first I was like "He's doing it wrong..." and then I was like:



            Sorry
            Last edited by phet_fresh; 08-07-2015, 07:34 PM.
            https://www.instagram.com/phet_fresh/

            Comment


            • Goodness gracious


              W I L D M A N 'S R O D S H O P




              R.I.P P.WALKER 2013/11/30

              Comment


              • Originally posted by 244Brick View Post
                Goodness gracious
                Thank man! You have been so long, How is going man?
                Enjoy the day
                https://www.instagram.com/phet_fresh/

                Comment


                • This week I finished the lathe job of my BBS LM custom wheel.

                  DSC_7003

                  The right one was from with wheels, it was damage so I bought new one right side.
                  but the new one is for the RX, LM-R and etc.
                  I choose this type 3D gold because it will match with the finished of my wheel.

                  DSC_7005


                  You could see the different, the retainer ring is bigger. So I need to lathe the center step inside new.
                  DSC_6994

                  The top is the original and bottom is already lathe to bigger hole. I had tested install, it's perfect fit.

                  DSC_7033

                  Also the outer step of center disc I need to lathe to fit with SSR barrel.

                  DSC_7008

                  It's just a little lathe for new step, and so amazing the hole for split is exactly same.
                  My plan will drill the new hole but it's perfect match so lucky me.


                  DSC_7046
                  DSC_7045DSC_7051

                  This is the finished of the lathe job. Everything was done perfect.
                  I send these wheels to the shop for finished, the center will clean send back to me for painting. The barrel will polish and finished with..... ?
                  So the final spec. is wide=10" lip=7" for the front/ wide=14" lip=7.5" for the rear. and off set !!! hahaha

                  Enjoy guys
                  Last edited by phet_fresh; 08-13-2015, 06:00 AM.
                  https://www.instagram.com/phet_fresh/

                  Comment


                  • Can't wait to see them polished up man
                    IG: @blk_gtr

                    Comment


                    • Originally posted by Dome View Post
                      I know that "Tarox" got 2 piece rotors in 360mm.

                      If you look for normal 1 piece rotors in 360mm take the OEM from the C63 AMG.
                      A pair cost around 350 $

                      The 2 piece OEM AMG rotors in 360mm cost around 1.100 $ each

                      Maybe these parts are an option for you. I switched to the 1 piece after my 2 piece rotors were done. Because for the price of one 2 piece rotor I can use around eight 1 piece rotors.
                      Definitely the better deal for me

                      2 Piece C63 AMG rotor:


                      1 Piece C63 AMG rotor mounted with 19" wheels:
                      Oh Dome! it's right no clearance to reduce the rotor diameter, hat is too big.

                      image
                      image

                      I will post selling these rotors and find the new set of 355 /2pcs.
                      Does anyone can tell me where I can get the cheap rotors pls?
                      Thank guys!
                      https://www.instagram.com/phet_fresh/

                      Comment


                      • Need updates, been too long!!!!

                        Comment


                        • Originally posted by AndyAZ View Post
                          Need updates, been too long!!!!
                          Hello Guys! Thank you for hit me up...
                          Lately my budget project gonna be super duper budget project get very slow progress.
                          How ever I will keep moving forward even abit.

                          My BBS LM 14J lips was sent to the plating shop and the center back here after remove the old paint.
                          I choose the matte brown for paint the center, that is not powder coat. It's 2K system paint by my self.
                          [IMG]image[/IMG]

                          I test waring with the gold split bolts. I like it, hope you guys like it.
                          Let guess the finish of my lips.
                          I try to assembly my wheels within this month. Keep tune. Cheer!
                          https://www.instagram.com/phet_fresh/

                          Comment


                          • Nice to see an update
                            IG: @blk_gtr

                            Comment


                            • hot diggity!!

                              Comment


                              • Originally posted by Dome View Post
                                Nice to see an update
                                Originally posted by Lukey View Post
                                hot diggity!!
                                thank guys.

                                I just have time to up load the photo from SLR.

                                DSC_7497

                                This the centres #BBS #LM back from the shop plating shop, I ask them to remove the old color. And the chocolate brown I painted by my self will post the video later.


                                DSC_7531

                                DSC_7543

                                Bonus image with bbs logo 3D.
                                https://www.instagram.com/phet_fresh/

                                Comment

                                Working...
                                X