Tweet
Hey I'm Oliver, been looking through Stanceworks forums, builds, features and everything it has to offer for quite a while now. Thought I might start up one of my own to show my cars to the world. I spend most of my time either building my cars, buying stuff for them or playing with friends cars. This year I have planned on spending more time drifting in my track car and now that it's finally at the engine builders it's getting closer to 100% completion.
I drive an S15 Silvia as a daily, here's some specs and recent pics -
Original JDM Autech S15
Nismo LMGT4 – Front: 18×9.5+12 215/40/18, Rear: 18x10.5+15 225/40/18
Aero Skirts
Aero Pods
Powered by Max Coilovers
JDM DC2R Integra Front Lip
Work RS wheel nuts
Rays LMGT4 centre caps
2.5” Straight pipes
SPL Pro Toe Arms
Nismo Castor Rods
HardRace Camber arms
Interior is pretty much 100% factory Autech, replaced the shifter with a new Nismo knob because the old one was haggard. Plans for now are to finish off my wing and have it painted. I've also ordered some new camber arms as my current ones are pretty much sitting on the chassis. So need a little more space so I don't bend anything.
My track cars aren't really worthy of a build thread at the moment so I'll just throw up a few pics in here from time to time.
I write up about most of the stuff I do on my blog if you're keen to check it out. I currently have an RB26 S13 in the build process and a 180sx as a drift car. More info on both of them and cool stories are on my blog -
http://oliversimportheaven.wordpress.com/
And I made a Facebook page so I can put up photos for everything I do.
https://www.facebook.com/pages/Olive...91048287609971
I drive an S15 Silvia as a daily, here's some specs and recent pics -
Original JDM Autech S15
Nismo LMGT4 – Front: 18×9.5+12 215/40/18, Rear: 18x10.5+15 225/40/18
Aero Skirts
Aero Pods
Powered by Max Coilovers
JDM DC2R Integra Front Lip
Work RS wheel nuts
Rays LMGT4 centre caps
2.5” Straight pipes
SPL Pro Toe Arms
Nismo Castor Rods
HardRace Camber arms
Interior is pretty much 100% factory Autech, replaced the shifter with a new Nismo knob because the old one was haggard. Plans for now are to finish off my wing and have it painted. I've also ordered some new camber arms as my current ones are pretty much sitting on the chassis. So need a little more space so I don't bend anything.
My track cars aren't really worthy of a build thread at the moment so I'll just throw up a few pics in here from time to time.
I write up about most of the stuff I do on my blog if you're keen to check it out. I currently have an RB26 S13 in the build process and a 180sx as a drift car. More info on both of them and cool stories are on my blog -
http://oliversimportheaven.wordpress.com/
And I made a Facebook page so I can put up photos for everything I do.
https://www.facebook.com/pages/Olive...91048287609971
Comment