Would get out there to work on the car, and provide some more updates. But we just got about 10" of snow the other day, and the drive to our shop hasn't been plowed yet.
Announcement
Collapse
No announcement yet.
The Grandmabile.
Collapse
X
-
Went out and worked on the car for about an hour today, trying to add some more camber in the back. As I suspected, everything was froze up after only 2 winter exposures.
Had to cut the nut off that holds everything tight, and then I got the stuff to break free. Only did the passenger side for now, as that's all I had time for. I'm not sure if I have too much, or not enough camber yet, but I'll be able to tell once everything is tightened back up and I have the chance to drive it around. I only have three crappy cell phone pictures for now.. I forgot my camera.
Comment
-
Lookin good! I love the new look.
E30 V8 Build thread
Go here be happy!
Instagram: stuartrussell
Store: alwaysindividual.bigcartel.com
Comment
-
I think you have room to roll your fenders still buddy.
2001 Focus Sedan from an ex-ricer. See my build thread
http://www.stanceworks.com/forums/sh...ad.php?t=17122
Comment
-
Tonight, I had my friend who owns a detailing company, Mirror Image Detailing in the Kalamazoo area for any locals, start my paint correction tonight. For those that don't know what that is, it basically is a full polish with a polisher to remove the swirl marks that develop from washing your car, small dirt, and everyday driving. Bring A LOT of the clarity back to the paint. Also picked up some Grade 8 hardware for the ORP I'm currently awaiting from Keegan Komponents . The small bolt to the far right is for the clamp on my rear camber arm. Onto the pictures!
What we started out with, hard to tell much difference by just the pictures.
Doing work.
Passenger fender after correction.
Hood after correction.
A few more before pictures.
That's all I've got for now! More pictures once the car is finished with the correction.
Comment
-
Grandma gold never looked so good.
2001 Focus Sedan from an ex-ricer. See my build thread
http://www.stanceworks.com/forums/sh...ad.php?t=17122
Comment
-
Originally posted by mike-81-240d View PostI like this alot....
Originally posted by Oxer View PostShould pull the bolts off the wheels for the lols.
Originally posted by Nickgt40 View PostDonde esta el oro?
Comment
-
Comment
Comment