Announcement

Collapse
No announcement yet.

E36 325i Gletscherblau Budget Build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Happy 3/6 day! Here's some pictures I've never posted, I need a new set of headlights. They're falling apart ahah

    3Q6A2875 by Philippe Gélinas, sur Flickr

    3Q6A2871 by Philippe Gélinas, sur Flickr

    3Q6A3031 by Philippe Gélinas, sur Flickr

    The car is in storage right now, can't wait to work on it!
    Last edited by Phil G; 03-06-2022, 08:17 PM.

    Comment


    • #32
      GOD DAYUM! i say take everything off the M3 and put it on the sedan, turn it into an m3 sedan! just think sedans are cooler, but looking forward to progress on the sedan.

      Instagram: @half_lung

      Comment


      • #33
        Man that's a lot of work. Lookin pretty good.

        Comment


        • #34
          Get yourself some swift springs and drop it even lower

          Comment


          • #35
            Long time without updating this thread...

            The exhaust was too loud so I ended up adding a 3'' magnaflow muffler.

            3Q6A1126 by Philippe Gélinas, sur Flickr
            3Q6A1129 by Philippe Gélinas, sur Flickr

            The passenger floor was repaired at the same time.
            3Q6A1133 by Philippe Gélinas, sur Flickr

            Perfect time to clean the carpet.
            3Q6A1134 by Philippe Gélinas, sur Flickr

            Added a PMC short shifter and the carpet was in!
            A74A4349 by Philippe Gélinas, sur Flickr

            The exhaust is still loud but much better
            A74A6358 by Philippe Gélinas, sur Flickr






            Comment


            • #36
              During winter I bought a set of Kosei K1 that needed some love. Here's how they look after a fresh white powder coat.
              A74A7117 by Philippe Gélinas, sur Flickr
              I went with a 245/40/17. I find that the tires are a little bit too tall, I think 235/40/17 would have been perfect but they are hard to find and more expensive.
              A74A7118 by Philippe Gélinas, sur Flickr
              How they fit with 12.5mm spacer in the front to clear the suspension. I tried a shorter spring (5'' without the helper spring) but even with the short spring, I wasn't able to fit the tire under the suspension.
              A74A7314 by Philippe Gélinas, sur Flickr
              A74A7098 by Philippe Gélinas, sur Flickr
              I made a custom lip with my M3 front lip, it's not too bad but not low enough. I bought another non-m bumper to make a custom front lip. To be continued...
              A74A8112 by Philippe Gélinas, sur Flickr
              A74A7325 by Philippe Gélinas, sur Flickr

              Comment

              Working...
              X