I'm really bad about keeping up with my forum posts and updates. Hopefully I can keep this one updated lol. I present to you my E30 LS swap!
Brake System:
Front: Wilwood 310mm rotors
Rear: Wilwood 295mm rotors
Front: Wilwood 6 piston dynapro calipers
Rear: Wilwood 4 piston calipers
Drivetrain:
Stock 3.73 LSD
Sikky LS swap driveshaft
Engine:
5.3 LM7 from a 2002 Silverado
Rebuilt by B&R Speed Shop in Louisville
LS6 intake manifold
Griffin aluminum radiator
2 electric fans
Sikky LS swap oil pan
Sikky LS swap mounts
ABS, heat, AC, cruise control delete
Sikky long tube headers 1 7/8
LSX innovations alternator bracket
ICT coil pack bracket
MS3 Gold Box ecu
Exterior:
Cliq Tuning e30 aero kit
Fuel:
Walbro 450
Interior:
Pioneer head unit
Broken ebay steering wheel
Rep Bride seats
Takata harness for driver
Full interior soon to be deleted
Various stickers for go fast 😉
Suspension / Wheel Setup:
Work Meister S1 16x8 et30 wrapped in Toyo R888R 225/45/R16
Sikky front control arm bushings lollipops
Ground Control complete coilover kit
Front koni adjustables bolted in existing housing
Rear koni adjustables
1 Pair front camber plates
Set of Eibach springs
4 Ground Control bump stops
Pair of rear upper shock mounts
Steering System:
E36 325i steering rack to clear the oil pan
LS1 power steering pump
Transmission:
T56 from 2002 Camaro SS
Spec stage 3 clutch with flywheel
Sikky trans mounts
To be continued:
Chase Bays e30 brake booster delete kit needs installed
Wilwood pedal set needs installed
Braided lines for brake system
Gold Box ecu needs installed
Cliq Tuning aero kit needs fitted
Waiting until everything is done for a wrap as close to calypsorot as possible
Roll cage
Seat time 😊
I will try to upload the pics in order from start of the swap to now.
This is what the e30 looked like before the swap. A little Christmas spirit lol
Pulling the old M20 out
After pulling the m20, we painted the engine bay white. It got very dirty soon after lol. When everything is all said and done it'll get a respray
Here's the clutch that I got, as well as getting the engine and trans together and dropped it in the car!
I've never had nice suspension on any of my cars so I wanted to ball out on these lol
The brakes were my favorite mod. I just love the way they look with the wheels!
Here are a little bit of goodies that will go with the LS swap
The swap currently sits here, front accessories are on, rad is mounted. The only difference is that the coil pack brackets are now different which will be shown after this picture
The steering shaft was such a PITA to put in lol. Just like everything else on the swap.
Brake System:
Front: Wilwood 310mm rotors
Rear: Wilwood 295mm rotors
Front: Wilwood 6 piston dynapro calipers
Rear: Wilwood 4 piston calipers
Drivetrain:
Stock 3.73 LSD
Sikky LS swap driveshaft
Engine:
5.3 LM7 from a 2002 Silverado
Rebuilt by B&R Speed Shop in Louisville
LS6 intake manifold
Griffin aluminum radiator
2 electric fans
Sikky LS swap oil pan
Sikky LS swap mounts
ABS, heat, AC, cruise control delete
Sikky long tube headers 1 7/8
LSX innovations alternator bracket
ICT coil pack bracket
MS3 Gold Box ecu
Exterior:
Cliq Tuning e30 aero kit
Fuel:
Walbro 450
Interior:
Pioneer head unit
Broken ebay steering wheel
Rep Bride seats
Takata harness for driver
Full interior soon to be deleted
Various stickers for go fast 😉
Suspension / Wheel Setup:
Work Meister S1 16x8 et30 wrapped in Toyo R888R 225/45/R16
Sikky front control arm bushings lollipops
Ground Control complete coilover kit
Front koni adjustables bolted in existing housing
Rear koni adjustables
1 Pair front camber plates
Set of Eibach springs
4 Ground Control bump stops
Pair of rear upper shock mounts
Steering System:
E36 325i steering rack to clear the oil pan
LS1 power steering pump
Transmission:
T56 from 2002 Camaro SS
Spec stage 3 clutch with flywheel
Sikky trans mounts
To be continued:
Chase Bays e30 brake booster delete kit needs installed
Wilwood pedal set needs installed
Braided lines for brake system
Gold Box ecu needs installed
Cliq Tuning aero kit needs fitted
Waiting until everything is done for a wrap as close to calypsorot as possible
Roll cage
Seat time 😊
I will try to upload the pics in order from start of the swap to now.
This is what the e30 looked like before the swap. A little Christmas spirit lol
Pulling the old M20 out
After pulling the m20, we painted the engine bay white. It got very dirty soon after lol. When everything is all said and done it'll get a respray
Here's the clutch that I got, as well as getting the engine and trans together and dropped it in the car!
I've never had nice suspension on any of my cars so I wanted to ball out on these lol
The brakes were my favorite mod. I just love the way they look with the wheels!
Here are a little bit of goodies that will go with the LS swap
The swap currently sits here, front accessories are on, rad is mounted. The only difference is that the coil pack brackets are now different which will be shown after this picture
The steering shaft was such a PITA to put in lol. Just like everything else on the swap.