Nicer teaser and all, but other than Touge, I see no left/right turning going on? Whaat? No tracks near you?
Announcement
Collapse
No announcement yet.
W201 Die Reiser Build
Collapse
X
-
UPDAAAAAAAATE:
I had to be a hotboi (banner sticker says Sausage Delivery - like initial D but german edition lololol)
My clutch setup from the UK got here yesterday! Amazing pricing (300 shipped to the usa for Single Mass Flywheel, disk, pressure plate and hardware).
Here are some pics. Flywheel is on already, and the rest will be going in shortly.
Please excuse the horrible photos lol. Ill get some better ones today.
Also first video review is out
Last edited by Duhafnusa4; 09-22-2020, 09:28 AM.
Comment
-
UPDATE:
Couldnt get my driveshaft extended locally so my british mates are helping out and sending me the front section from a manual car (has the length I need) along with the transmission crossmember.
I did get my clutch line made and bled so now she clutches and shifts getting closer.
Also I installed a set of volvo injectors (flowing around 450cc @4.5 bar) so I should be good fuel wise till I go turbo (going to run a VGT setup controlled by the ECU)
Pics soon
Comment
-
Originally posted by matthew_e28 View PostNice project! I've been thinking about putting some coils from E36 to my W124 but the main question is.. Does your strut mounts are strong enough to handle stiffness of the coilovers?
Comment
-
went to IA fall fest in bowling green (where I live)
It was a bunch of fun, and I got to do a lot of tuning. Added some accel enrichment and stuff and shes going real strong (spins all the way through 2nd haha!). I need an LSD. Im still on stock pullies around 7 psi. I also will be making the VVT working soon too.
Comment
-
Originally posted by 2GRX7 View PostNice! Now, I think you said that's a 3-Series bumper? Fitment looks good! I don't know why I thought you were already turbro'ed (brainfarts!). Sounds like that tune is ready for emailing!
Go to rusefi.com/online the tune is uploaded there.
Comment
-
Got tired of the ratchet m3 bumper and found some goodies at the junkyard, and took some pics. Oh also I found the Nardi I have wanted for this car: Gara 3 ALL WOODS
IDK Why it wont let me rotate the steering wheel pic sorry
USDM headlight I snagged for fun for a cold air intake. Fog still works and I wired it to come on with the headlights. Although I plan on just using this light for sunny days and car shows.
Last edited by Duhafnusa4; 11-16-2020, 08:20 AM.
Comment
Comment