Page 1 of 2 12 LastLast
Results 1 to 25 of 27

Thread: 2 sets of bbs style 5 3 piece - 17 and 18"

  1. #1
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default 2 sets of bbs style 5 3 piece - 17 and 18"

    Haven't been on here in a while, but clearing out the last of the sets and these two in particular seem suites for SW so i figured I would post on here

    Set#1 sold
    BBS style 5 rc090
    3 piece 17”x9 and 17x10 for e36m fitment or others

    it’s likely the only true 17” 3 piece build you’ll come across. These halves were built custom for this application to fit an e36 m3 but would fit many others as well. Never got the chance to use them, so I hope someone grabs this opportunity and puts them to good use. These are untouched since the work done to them.
    17x9 front and 17x10 rear
    5x120 bolt pattern
    Faces powdercoated gloss gunmetal
    spinfab billet waffle plates custom - makes the wheel look like a bbs rs
    Center hex caps - 24k gold plated half height
    BBS oem logos black/gold
    Bolts 24k gold plated, lock nuts zinc plated
    New forged lips polished 2” and 3”
    New inner barrels powder coated satin black. 6.5” and 7”. nothing cut up, these are new
    24k plated valve stems, and all the other details- sealed and torqued to spec

    All of the parts above are brand new minus the original faces which were in amazing shape and refinished to perfection. the faces have all markings and have not been modified

    First to pick these up in NY locally, sold



    set#2
    BBS style 5 rc090
    3 piece 18”x8.5 and 18x9.5

    true 18” 3 piece double step build. These are untouched since the work done to them.
    18x8.5 front and 18x9.5 rear
    5x120 bolt pattern
    Faces powdercoated gloss silver
    billet waffle plates custom - makes the wheel look like a bbs rs
    Center hex caps - polished half height oem hex. rare at this point
    BBS logos- blue/chrome
    Bolts triple chrome plated, lock nuts zinc plated
    New forged lips polished 2” and 3”
    New inner barrels powder coated satin black. 6.0” and 6.5”. nothing cut up, these are new
    sealed and torqued to spec

    All of the parts above are brand new minus the original faces which were in amazing shape and refinished to perfection. the faces have all markings and have not been modified

    First to pick these up in NY locally, 3300.00 if you need shipping inside the lower48 states, 3500 shipped

    not building any more of these, first to grab them gets them. not holding for anyone, and no trades at this time.

    pictures of both in a few minutes
    Last edited by 1badg35; 03-03-2020 at 07:34 AM.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  2. #2
    Join Date
    Apr 2015
    Location
    Orlando/Columbus
    Posts
    30

    Default

    In for pics

  3. #3

    Default

    Love some pics of the 18s, please

  4. #4
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    forgot i posted these here. lots of interest elsewhere but both somehow are still here.

    18" set is 18x8.5+30 and 18x9.5+15 - faces are metallic silver and they come with oem half heights and these light blue/chrome bbs logos





    17" set is 17x9+14 and 17x10+18 faces are gunmetal metallic, 24k plated everything and black/gold logos.



    both sets are 100% complete and ready to ship or be picked up. not willing to make any changes to either, just outright sales.

    easiest way to reach me is studio.delucav@gmail.com
    Last edited by 1badg35; 08-20-2020 at 10:18 AM.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  5. #5
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    bump. both sets are available to be picked up or ship out. the 17" set i am motivated to sell, dropping to 2950 picked up in NY, 3150 shipped inside the lower 48 states..

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  6. #6
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    bumping these back up as I would like to sell this week.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  7. #7
    Join Date
    Aug 2019
    Location
    Southampton, UK
    Posts
    1

    Default

    How much for shipping to the UK?

  8. #8
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    anyone interested feel free to send an email. studio.delucav@gmail.com

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  9. #9
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    last bump on either set here. far too many window-shoppers.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  10. #10

    Default

    Interested in the 17’s. You don’t have the blue and gold logos?

  11. #11
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    sure, if you want the blue and gold instead of the black and gold logos, its 100$ additional. not a problem though
    email studio.delucav@gmail.com for quickest response

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  12. #12

    Default

    Have a set of 17in style 5 faces, where can I get parts to convert to 3 piece ? is there another supplier besides blackforest ?

  13. #13
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    I supply halves like this on a case by case basis. Sent you a message/email

    lots of emails with interest, but both sets are still available.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  14. #14
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    I supply halves like this on a case by case basis. Sent you a message/email

    lots of emails with interest, but both sets are still available.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  15. #15
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    18" set is still available
    Last edited by 1badg35; 03-03-2020 at 07:33 AM.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  16. #16

    Default

    Picked up where? Im in Pa.

  17. #17
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    Long Island NY, but send me an email and maybe we can work something out thats a little closer. I do head into NJ once or so a week.
    studio.delucav@gmail.com

    edit 17s have sold, 18s still available for pick up or shipping
    Last edited by 1badg35; 11-19-2019 at 12:11 PM.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  18. #18
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    18" still available. 3300 picked up, 3500 shipped inside the us.
    Last edited by 1badg35; 03-03-2020 at 07:32 AM.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  19. #19
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    Bumping this thread. 18” set needs to go to a good home

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  20. #20
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    18” set is somehow still available. 3200 picked up, 3375 shipped inside the us.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  21. #21
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    the 18" set is 18x8.5+30 and 18x9.5+15 is still available






    major price drop. 3050 picked up in NY, 3250 shipped inside the lower48. need these sold asap, so please email me studio.delucav@gmail.com if youre a serious buyer and ready to send payment

    by the way, this is total crackhead pricing. you typically cant get a 2 piece 18" set unfinished for this price, nevermind one that has been upconverted to 3 piece.. 2 years ago the price for something like this ranged in the 4000-4400$ to build and they typically were sold before even listed for sale.. my my how the market changes

    --
    Last edited by 1badg35; 08-20-2020 at 10:25 AM.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

  22. #22

    Default

    Where did you get the lips from?

  23. #23

    Default

    Pm sent

  24. #24

    Default

    And email sent.

  25. #25
    Join Date
    Oct 2009
    Location
    Long Island
    Posts
    2,693

    Default

    18” set above is sold, 17” set is sold but there are 2 more sets and only 2 more sets left. Once they’re gone that’s it.

    Set #1 - rc090 3 piece 17x8.5/9.5

    3 piece 17”x8.5 and 17x9.5 for a wide variety of cars. Very versatile sizes

    These halves were built custom for this application to fit an e36 m3 and allow for a larger tire size but would fit many others as well. Never got the chance to use them, so I hope someone grabs this opportunity and puts them to good use. These are untouched since the work done to them.
    5x120 bolt pattern
    Faces powdercoated gloss gunmetal
    spinfab billet waffle plates custom - makes the wheel look like a bbs rs
    Center hex caps - mirror polished half height
    BBS oem logos platinum white/chrome
    Bolts triple chrome plated, lock nuts zinc plated
    New forged lips polished 2” and 3”
    New inner barrels powder coated satin black. 6” and 6.5” nothing cut up, these are new
    Chrome plated valve stems, and all the other details- sealed and torqued to spec

    All of the parts above are brand new minus the original faces which were in amazing shape and refinished to perfection. the faces have all markings and have not been modified in any way.

    3100$ picked up in New York.


    Set #2. Rc090 2 piece 17x8+20
    All of the same details as the set above, but just in the original size and original 2 piece. Barrels have been powdercoated/polished so as to be in better than factory condition. Spinfab center cap kit just like the above.
    Same finishes, details etc.
    2300$ picked up in New York

    Again, these are the last two sets. These were part of a large hoard that was built one by one, and this is what’s left.
    Last edited by 1badg35; 01-22-2021 at 08:40 AM.

    1990 Nissan fairlady Z32 - long term build
    1982 euro porsche 930 turbo

    "A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012

    http://www.stanceworks.com/forums/sh...ad.php?t=19185

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •