Love those older Lexuses (Lexusi?), how's the build going? I've read on prothesiswriter.com they are pretty reliable, especially powertrain, but it's still an old car so something can go wrong at any time.
Announcement
Collapse
No announcement yet.
usdm jam
Collapse
X
-
wheels are not fully refurbished and arent the final color٫ but after grabbing these rare specd barrels٫ the combo with the faces are a little too positive and ultimately hit the strut. To remedy that٫ i had to get 25mm spacers all the way around. The fronts ended up looking BEAUTIFUL٫ and still surprisingly tame albeit the decent stretch on the tire. The front is a very aggressive and meaty look but those haven't even been changed to the new barrels yet so im reluctant to see how they fit after.
I've been neglecting the Lexus solely because its hard to find parts for and takes a little more ingenuity...so I've been keeping myself busy with my daily racer project.
It'll most likely end up on or and 16x8 slips but it keeps me satisfied while the Lexus is down...plus 10 psi in a sub 2500 lb car is....addicting. Its a 2000 protege es (lightweight gen) with a Mazdaspeed ecu٫ manifold٫ turbo and a few more mods.Last edited by audobon; 01-06-2021, 04:13 PM.WHEELUMINATI SERVICE
@airbrandon
@thewheeluminati
Comment
-
Originally posted by FKemp View PostLove those older Lexuses (Lexusi?), how's the build going? I've read on prothesiswriter.com they are pretty reliable, especially powertrain, but it's still an old car so something can go wrong at any time.WHEELUMINATI SERVICE
@airbrandon
@thewheeluminati
Comment
-
Originally posted by BozoBubble View PostSo happy to hear that you found a 5 speed swap for the Lexus, that's going to be super sick. There were technically ES250s that left the factory with a 5 speed but they are rarer than hen's teeth. Did you get your swap parts of a Lexus or a Camry?
Uh, camry v6 trans, es250 mt ecu, it’s a hodgepodge of parts really but I’m definitely pumped to get it done, I’m sure just the oddity of it will add a little more value to my car. I got faith in this being sought after once people find out more about them.WHEELUMINATI SERVICE
@airbrandon
@thewheeluminati
Comment
-
been super slow with EVERYTHING that involves this car but finally threw the 8s on this car, it’s a reserved yet aggressive stance, I’m pumped to get this thing back on “the road” which really just means a hundred or so miles until it becomes a trailer queen.
sorrynotsorry
by the way, does anybody know how rare 80s-90s SSR wheels are in 5x100? I’m beginning to collect them and find a lot of people that want the more exotic styles that SSR produced, have trouble hunting these things down.Last edited by audobon; 04-21-2021, 01:33 PM.WHEELUMINATI SERVICE
@airbrandon
@thewheeluminati
Comment
-
five speeds in
still getting the fitment dialed in, unfortunately pulled my fenders to look good on SPACERS but now that I got a little more sense, and am tired of rubbing…I took the spacers off and now my fitment is sunk - threw some project kics 5mm on to get it JUST right but rather not have spacers at all.
been through crazy problems, axles, shifter cable snapping, a bunch of stuff…but I’m excited to see my idea keep coming to fruition.WHEELUMINATI SERVICE
@airbrandon
@thewheeluminati
Comment
Comment