yes, so awesome.
Announcement
Collapse
No announcement yet.
That "CHOPTOP" - MB W115 / 1975
Collapse
X
-
-
Got the carbon dioxide bottle back today so tomorrow we start to weld again. Thinking of welding the front fender first and then update the bigger picture of this car to you guys.
Havent done anything to the car in couple of days because these late nights in work...shame on me. Still, need to earn that money to do on my free-time what i want.
Ordered some more equipment to the garage, in a few weeks i should get new beading machine with 12pcs of rollers. Also a english wheel has been on my mind, havent searched that much but i think i need to invest on that also, time will tell.
That should help me a little bit with these metalworks, we'll see.
So heres only couple of random pictures of the car building, at least decided to show you something.
image35.jpg
image36.jpg
image38.jpg
These two last pictures shows my most used tools with the car. I have done metalwork a lot in my life but fabricating these small thicness bodypanels is a new chapter. Everyday learning somethin new and everyday becoming better what i do, still a lot learning ahead.
image37.jpg
IMG-20170922-WA0007.jpg
Thats for now, in the weekend more updates and pictures of the whole car.
Comment
-
So i moved the car out off the garage and cleaned a little bit so i can better do my job with the car. Benz has been sitting almost 2 months at the garage so there was a little bit what to clean ja wipe the dust out...
Got the fender welded, pretty good results with it. Then grapped couple of pictures about the Benz what i promised. In the pictures full laid-out, no picture when bags are up so sorry about that.
image41.jpg
image42.jpg
image46.jpg
image43.jpg
Sorry about the look of the engine bay, hasnt touched there yet but that need some re-doing and fabricatin. Looks discusting.
But for now, here you go!
Comment
-
The top chop looks factory, if I didn't know you did it I would not spot the difference, and front fenders are a lot better now
Only negative thing in my opinion it the wheels look really tiny compared to the whole car's size
FB: @DumbassCarCrew - IG: @fruttolo_dumbasscrew
Comment
-
Originally posted by Fruttolo View PostThe top chop looks factory, if I didn't know you did it I would not spot the difference, and front fenders are a lot better now
Only negative thing in my opinion it the wheels look really tiny compared to the whole car's size
I think too those 15" looks little tiny compared to the car size, i've been looking 15" or 16" epsilon mesh's or somethin pretty close that. Who knows what is coming in the future.
But before i get the floor done and the ride height to the minimum / where my eyes like it, i decide the wheel size. Cant tell before i see whole picture on the right height.
Comment
-
First of all, sorry about the lack of updates..
Been busy with work so getting time with the Benz is hard now, but somethin has been done neither so much as before.
So, also the left side of the car is now ready with the doors, and today i got the front fender also welded. Pretty busy weekend but thats somethin i got done this time.
Also last week some evening i did get done the inside of the right side pilars, and here's one picture of the result, looks pretty good if i may say! So the first picture is from right side C-pilar.
Time for some pictures!
image45.jpg
image47.jpg
image48.jpg
image49.jpg
This last picture shows (if you can see any of those markings) where and how i did this lowering to the wheel arch. You maybe can't see those measurements but at least you see those lines where i did those cuts. If you have readed the whole thread you know this side was made different than the other side, why? Because i dont use these fenders. Both are full of rust inside and cant be use in the future, the top of the fenders were cut through when i was removing the paint from the car. Need to buy original used ones or new if the quality is good, depends only that. But it's good to use these and do the right thing now than ruin the new fenders. Also i got the idea now which i will be using with the new fenders, and this left side was easier and a lot quicker to do than the other side.
So here we are now, next is time to start welding the roof and plan the floor of this car. Need to move car and lift it so i can see under better and start measuring.
This weekend i thought i could take some pictures outside because there was snowing and i think it could look good when full laid-out in the snow but...need to wait. Only water is coming from the sky now.
Also got done a little gift, did this rose last week. Pretty easy to do and good to train skills with some fabricatin these little things occasionally.
image50.jpg
Till next time, will get updates sooner this time!Last edited by JuusoEt; 12-04-2017, 12:15 AM.
Comment
-
this is so rad, curious to see if you have decided whether to paint it or not? I'm torn personally, I think the rat rod look is baller, however a deep gloss tan, or deep cherry red with a bunch of flake would look sweet. Either way can't wait to see progress
Comment
-
Originally posted by slamitall View Postthis is so rad, curious to see if you have decided whether to paint it or not? I'm torn personally, I think the rat rod look is baller, however a deep gloss tan, or deep cherry red with a bunch of flake would look sweet. Either way can't wait to see progress
Updates of the air-suspension also comin because i need to lift the car for the floor work.Last edited by JuusoEt; 12-08-2017, 12:10 AM.
Comment
Comment