Tweet
FS: 16x7 25et 3-piece ARE 5spokes, REFINISHED ANY WAY YOU WANT!
So this is sort of a compilation of a few separate posts on another site... sorry if it seems pretty ADD! 
Item Description:
16x7 25et 3-piece ARE wheels with dual bolt patterns 4-108/114(I think) Made in Japan(very possibly by the same place that makes Works) in the early 90s, sold in the US by American racing. these were brand new old stock when bought them never had a tire mounted on them but had 2decades of storage damaged/wear&tear on them. I had custom machined flat caps made out of solid aluminum blanks with 1/2"dr port to tighten and remove them.
The bad: NOTHING!! THESE WILL BE MINT WHEN DELIVERED TO YOUR DOOR!
Asking/Offering Price: $1800obo
Keep in mind these fully restored will fetch $2500 with some wider lips. However you'd need wider barrels to really set these off on a focus. Cut and weld in new 1.5" bands to 16x8.5!
Email Address: PM me
Your Location: Vancouver Canada
Pics (if available):
Tires are off, wheels are being completely refinished as i write this.
all curb damage and any bends has already been fixed!
a couple of nicks in the face are being filled and then the faces and the caps are being machine cut on the lathe to make the finish perfectly uniform.
inside edges *of the spokes(currently black) will be stripped and cleaned up, barrels will get blasted and lips will be polished again to a mirror shine. :thumbup:
(i can and will include 3x 195/40/16 Yoko S-drive tires all with 80+% tread remaining for free) with the centers and caps finsihed any way you want with any color you want....
- machine cut face with color matched inner spokes... no problem.
- custom color centers, no problem.
- custom color barrels, no problem.
Full Polish of the faces and caps is extra as are new bolts should you want them or you can replace them after the fact on your own
if you are scoffing at the price then these are not for you.
each wheel will have approximately 3-8hours put into refinishing them PROFESSIONALLY; disassembly, cleaning, blasting, stripping, welding, machining, polishing, paint/powdercoating before final assembly, hand torquing of 36 rim screws per wheel and then halves sealed with proper DOW sealant!
No 3pc wheels are cheap and these wheels are extremely rare despite being ARE's.
These are the only set on and for a Focus and are light weight and extremely rare in general!!
I'm open to payment plan options for serious buyers
Broke the wheels down today so they can go back to the refinisher to get made minty and discovered i MIGHT be able to make these into 7.5s and get a little better offset out of them at the same time. i'm going to have the faces cut so this will be a simple change without any weird lines!
Clearance to BRAND NEW SVT front brakes Pads and rotors:
*
*
*
a shot of the face profile and dish... lips have yet to be polished!
*
*
Barrels will come brushed like this unless requested differently: *
Faces are back bolted and the lips are sealed together...
faces punched out:
ZEEEEE BOLTZ!
*
:thumbup:
Stand out from the crowd!
Item Description:
16x7 25et 3-piece ARE wheels with dual bolt patterns 4-108/114(I think) Made in Japan(very possibly by the same place that makes Works) in the early 90s, sold in the US by American racing. these were brand new old stock when bought them never had a tire mounted on them but had 2decades of storage damaged/wear&tear on them. I had custom machined flat caps made out of solid aluminum blanks with 1/2"dr port to tighten and remove them.
The bad: NOTHING!! THESE WILL BE MINT WHEN DELIVERED TO YOUR DOOR!
Asking/Offering Price: $1800obo
Keep in mind these fully restored will fetch $2500 with some wider lips. However you'd need wider barrels to really set these off on a focus. Cut and weld in new 1.5" bands to 16x8.5!
Email Address: PM me
Your Location: Vancouver Canada
Pics (if available):
Tires are off, wheels are being completely refinished as i write this.
all curb damage and any bends has already been fixed!
a couple of nicks in the face are being filled and then the faces and the caps are being machine cut on the lathe to make the finish perfectly uniform.
inside edges *of the spokes(currently black) will be stripped and cleaned up, barrels will get blasted and lips will be polished again to a mirror shine. :thumbup:
(i can and will include 3x 195/40/16 Yoko S-drive tires all with 80+% tread remaining for free) with the centers and caps finsihed any way you want with any color you want....
- machine cut face with color matched inner spokes... no problem.
- custom color centers, no problem.
- custom color barrels, no problem.
Full Polish of the faces and caps is extra as are new bolts should you want them or you can replace them after the fact on your own
if you are scoffing at the price then these are not for you.
each wheel will have approximately 3-8hours put into refinishing them PROFESSIONALLY; disassembly, cleaning, blasting, stripping, welding, machining, polishing, paint/powdercoating before final assembly, hand torquing of 36 rim screws per wheel and then halves sealed with proper DOW sealant!
No 3pc wheels are cheap and these wheels are extremely rare despite being ARE's.
These are the only set on and for a Focus and are light weight and extremely rare in general!!
I'm open to payment plan options for serious buyers
Broke the wheels down today so they can go back to the refinisher to get made minty and discovered i MIGHT be able to make these into 7.5s and get a little better offset out of them at the same time. i'm going to have the faces cut so this will be a simple change without any weird lines!
Clearance to BRAND NEW SVT front brakes Pads and rotors:
* * * a shot of the face profile and dish... lips have yet to be polished!
* *Barrels will come brushed like this unless requested differently: *
Faces are back bolted and the lips are sealed together...
faces punched out:
ZEEEEE BOLTZ!
* :thumbup:
Stand out from the crowd!
