Integra 5 Lug Conversion?

[jared1988]

lol for show buddy

[Kielan]

my buddy said a CRV chassis is based off a civic chassis but is beefed up for the SUV status and the suspension geometry is not the same. he said to get ITR stuff. i guess he used euro r accord stuff for his swap, crazy 5 link rear suspension in the rear

I guess when the time comes then I will be going with ITR stuffs. Euro R swap just sounds like half way through I'd get up and kill myself.

[jared1988]

handles like a fucking dream though. thank goodness the hobby garage had the 3ft extension and wobble end we needed for the impact wrench lol

[Oxer]

Euro rear ends are ridiculous. Bars everywhere! LOL

[jared1988]

my buddy said a CRV chassis is based off a civic chassis but is beefed up for the SUV status and the suspension geometry is not the same. he said to get ITR stuff. i guess he used euro r accord stuff for his swap, crazy 5 link rear suspension in the rear

[Oxer]

what about filling and drilling your stock stuff to 5x100? I swear I saw a post of an xb that did it like that on the cheap.

If you value life, I would advise against this. If you really wanted to do something along those lines I would just get a machine shop to spin up new hubs, but then again its cheaper to find ITR stuff.

[tomshouse516]

what about filling and drilling your stock stuff to 5x100? I swear I saw a post of an xb that did it like that on the cheap.

[Oxer]

Crv front CALIPERS are the same as ITR, but The hubs are different due to the engine having a b20. Im pretty sure the shaft ends will be different aswell.

The only real way to do it without headfucks is to get the full conversion from an ITR. Also, you cant just bolt on the hubs in the rear, you need the complete spindle as they are different from 4 to 5 stud. the hub wont bolt up properly.

[Jorge]

My friends a big Integra guy, could build one with his eyes shut I bet. I shall ask him if hes written a guide / or knows of one for you, because I've heard him mentioning 4 to 5 lug Civic swaps before.

[Kielan]

Sounds like he's someone I should be talking to haha.

[jared1988]

YUP, hes hella old and has been into cars forever so i would trust w/e he tells me. hes got like 3 engine blocks (IIRC sleeved k24) at his house and hella extra parts. enough to build at least 1 of them

[Kielan]

EG6 has the exact same setup suspension wise as an Integra, so if he knows for that I'm sure he knows. Thanks again man.

[jared1988]

If you could, that would be great!

hes got an eg6 in the states but im more than sure he should know what you need *crosses fingers*

[Kielan]

If you could, that would be great!

[jared1988]

did a ITR 5 lug swap to my buddys accord, i can ask him if he might know what you can use for your regular teggy