2009 mazdaspeed3, cobb short ram intake, 223 to the wheels (cobb dyno sheet)
1996 honda stepwgn, b20b powered, non vetach, 126 hp (wiki) lol beast
1996 mitsubishi evo IV, 4g63 powered, 345hp (wiki)
Announcement
Collapse
No announcement yet.
brag about your hp!
Collapse
X
-
1990 VW Corrado G60
Nuespeed intake, rebuilt G-Lader with tighter pulley's, 2.5" stainless steel cat back, magnaflow muffler, and a shocker sticker... and 148,XXX miles so i would say 165 hp if i'm lucky.
Leave a comment:
-
'05 Mazdaspeed MX-5, stock engine save for a BEGi throttle body inlet pipe....lol. But after my next set of mods including a Cork Sport Power Series FMIC/intake & exhaust I should be around 200whp or so.
Leave a comment:
-
it is running 7psi and no intercooler. It is around 300hp at the wheels.
Leave a comment:
-
damn that is really clean. I like the supercharger too, rotrex are the best.Originally posted by Hartgeh27 View PostHmmm lets see my car is a 318is. or was a 318is.
power adders
99 s52
OBD1 conversion
AA stage 1 SC
3" custom exhaust
Thats all


excuse how dirty the car is. it was just after i fired it for the first time.

How much boost are you pushing? Are you running it through an intercooler?Last edited by conski; 10-28-2010, 09:43 AM.
Leave a comment:
-
0-60...faster than the speed of lightOriginally posted by runningpanda View Post1984 BMW 528e
7 million horses.
Lol.
my car is all stock at the moment due to the cis injection being a pain in the ass to tune. Stock it pushes 220hp to the wheels, I deleted one of the mufflers so it might be more.
I am gathering parts and funds to swap in a 3.6 AMG engine (stock 278 hp) from a c36, going to have a 5 speed transmission behind it either the cosworth getrag or a 300e box. The 3.6 will be supercharged using a rotrex centrifugal blower, going to run it through an intercooler as well. Under 9lbs. boost. Only looking to push about 400hp because that is all the tranny can handle.Last edited by conski; 10-28-2010, 09:42 AM.
Leave a comment:
-
I'm always up for bragging haha
Stock engine, custom headers and a dual 2.25" exhaust. Probably around 285 crank, 240 wheel

Shooting for 400whp over winter
Leave a comment:
-
Hmmm lets see my car is a 318is. or was a 318is.
power adders
99 s52
OBD1 conversion
AA stage 1 SC
3" custom exhaust
Thats all


excuse how dirty the car is. it was just after i fired it for the first time.
Leave a comment:
-
MazdaSpeed3, 2010, HKS RacingSuctionReloaded Intake, 263 HP, 220 or so whp. No dyno yet until I add more parts and tune, though 270 is my goal at the wheels.
Leave a comment:
-
brag about your hp!
list your performance mods with pictures of your engine
anything horsepower goes....lets see what you got!Tags: None

Leave a comment: